Stereocomplex Formation in the Poly(L-lactic acid)/poly(D-lactic acid) Melt Blends and the Melt Spun Fibers
نویسندگان
چکیده
منابع مشابه
Melt Rheology of Poly(Lactic Acid)/Low Density Polyethylene Polymer Blends
In this work, rheological properties of poly(lactic acid) (PLA), low density polyethylene (LDPE) polymer blends were investigated in the molten state. The experiments were carried on a capillary rheometer. The effect of shear stress, temperature and blending ratio on the flow activation energy at a constant shear stress and melt viscosity of the blends are described. The results showed that the...
متن کاملNeedleless Melt-Electrospinning of Biodegradable Poly(Lactic Acid) Ultrafine Fibers for the Removal of Oil from Water
As environmentally friendly and degradable material, Poly(lactic acid) (PLA) ultrafine fibers are promising candidates for the removal of oil from water. In this work, a self-established needleless melt-electrospinning process was used to produce PLA ultrafine fibers with diameters in the range of 800 nm–9 μm. In order to obtain ultrafine fibers, three types of hyperbranched polymers were respe...
متن کاملMechanical response of melt-spun amorphous filaments
High-speed melt spinning of a cyclo-olefin polymer (COP) and a copolyamide (CoPA) have been performed. Differential scanning calorimetry curves of the resulting monofilaments show that they remain in an amorphous state even after hot drawing. Wide angle x-ray diffraction patterns of undrawn and drawn COP filaments show that although the material remains in an amorphous state, a degree of orient...
متن کاملCOERCIVITY MECHANISM OF MELT-SPUN Sm(Fel1Ti)
Hysteresis loops of randomly oriented grains with uniaxial anisotropy were computed on the basis of an array of 27 Wigner Seitz cells representing crystallites which interact by exchange coupling at the grain boundaries. The computed coercivity increases linearly with increasing interatomic exchange. Using the experimental anisotropy and exchange parameters for Sm(FellTi), we found 1.lo&=1.2 T ...
متن کاملThe Structure and Magnetic Properties of Co77Zr18W5 Melt-Spun Ribbons
Based on X-ray diffraction, microscopic and magnetic analysis, the structure and magnetic properties of Co77Zr18W5 melt-spun ribbons were studied in this paper. A new element to stabilize the metastable Co5Zr phase was found and the coercivity observed in Co-Zr alloys can be obviously enhanced by proper tungsten substitution. The Curie temperature of Co77Zr18W5 ribbons is 475 ̊C which suggests t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Gakkaishi
سال: 2008
ISSN: 0037-9875,1884-2259
DOI: 10.2115/fiber.64.212