Stiffness-similar models for wind tunnel tests based on 3D printing
نویسندگان
چکیده
منابع مشابه
Wind tunnel tests of a free yawing downwind wind turbine
This research paper presents preliminary results on a behavioural study of a free yawing downwind wind turbine. A series of wind tunnel tests was performed at the TU Delft Open Jet Facility with a three bladed downwind wind turbine and a rotor radius of 0.8 meters. The setup includes an off the shelf three bladed hub, nacelle and generator on which relatively flexible blades are mounted. The to...
متن کاملLow-Speed Wind-Tunnel Tests on some Slender Airbus Configurations
An experimentalinvestigation has been made of the subsonic lift, drag and longitudinal stability characteristics of models representing some alternative slender airbus configurations. For the same wing planform of aspect ratio 1.4 the lift, drag and pitching moment have been measured for two wings of maximum thickness/chord ratio 4 and 9 per cent respectively, both without and with various body...
متن کاملInterpolating Spline Curve-Based Perceptual Encryption for 3D Printing Models
With the development of 3D printing technology, 3D printing has recently been applied to many areas of life including healthcare and the automotive industry. Due to the benefit of 3D printing, 3D printing models are often attacked by hackers and distributed without agreement from the original providers. Furthermore, certain special models and anti-weapon models in 3D printing must be protected ...
متن کاملWind Tunnel Tests for Wind Pressure Distribution on Gable Roof Buildings
Gable roof buildings are widely used in industrial buildings. Based on wind tunnel tests with rigid models, wind pressure distributions on gable roof buildings with different aspect ratios were measured simultaneously. Some characteristics of the measured wind pressure field on the surfaces of the models were analyzed, including mean wind pressure, fluctuating wind pressure, peak negative wind ...
متن کاملClosed-Loop Control Wind Tunnel Tests on an Adaptive Wind Turbine Blade for Load Reduction
Wind tunnel tests on a non-rotating, dynamically scaled wind turbine blade equipped with variable trailing edge geometry were carried out. The effectiveness of the system for active load reduction purposes, with the interaction between structural dynamics, aerodynamics and control was tested. The actuation of the adaptive trailing edge was based on a piezoelectric bender actuator. The full aero...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2020
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1507/4/042010