Strain Partitioning and Void Formation in Ferrite-Pearlite Steels Deformed in Tension
نویسندگان
چکیده
منابع مشابه
Divorced Pearlite in Steels
Steels containing large carbon concentrations are used particularly when a large hardness is required, for example in the manufacture of components such as bearings. This, however, makes it difficult to shape or machine the alloys during the process of component manufacture unless they are first heat–treated into a softened condition. One method of achieving this economically is to generate a m...
متن کاملULTRA FINE FERRITE FORMATION IN Si-Mn TRIP STEELS
Abstract: In the present investigation, the effects of thermomechanical processing parameters and the steel chemical composition on the ultra fine ferrite formation characteristics were studied. This was programmed relying on the capabilities of strain induced transformation (SIT) phenomenon and applying to different grades of Si-Mn TRIP (Transformation Induced Plasticity) steels. According...
متن کاملElectropulse - induced cementite nanoparticle formation in deformed pearlitic steels
Passing one electric-current pulse through deformed pearlitic steel wires at room temperature causes the formation of cementite particles around 30 nm in size. This is found not only in some particular locations but throughout the cementite area, which reveals a different mechanism from traditional spheroidization of cementite plates because the latter leads to the formation of particles with m...
متن کاملQuantitative measuring of pearlite in carbon steels using electromagnetic sensor
Non-destructive Eddy current (EC) technique has long been used to detect discontinuities in materials. Recently, its application has been extended to characterize materials microstructure. In order to identify different microstructures, four plain carbon steel bars with different chemical compositions (AISI 1015, 1035, 1045 and 1080) were used in annealed condition. The pearlite percentage, car...
متن کاملFormation of Meso-Scale Roughening in 6022-T4 Al Sheets Deformed in Plane-Strain Tension
Meso-scale surface roughening evolution in 6022-T4 Al sheets was investigated using plane-strain tension. Formation of grain-scale hills and valleys and their relation to the morphologies and corresponding orientations of surface grains after deformation were examined experimentally. These observations were analyzed using various approaches based on the Schmid and Taylor crystal plasticity mode...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1976
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.62.1_90