Strains on steel reinforcement of low-rise concrete walls during shake table tests
نویسندگان
چکیده
منابع مشابه
Shake Table Tests of Reinforced Concrete Flat Plate Frames and Post-tensioned Flat Plate Frames
A research study was undertaken to assess performance of flat plate systems constructed with slab shear reinforcement under dynamic loads. The research program consisted of shake table tests and accompanying analytical studies of two, approximately one-third scale, two-story, two-bay, slab-column frames. One specimen was constructed with reinforced concrete (RC) slab, whereas the other specimen...
متن کاملEducational Shake Table Models of Cfs Shear Walls
Small-scale, instructional shake tables, such as the UCIST shake table, are used at many colleges and universities to provide educational and research experiences in seismic behavior of structural systems. This paper describes the development of a physical model and associated educational materials that demonstrate the seismic behavior of shear walls used in cold-formed steel (CFS) building sys...
متن کاملCyclic Behavior of Low Rise Concrete Shear Walls Containing Recycled Coarse and Fine Aggregates
In this study, the cyclic behaviors of low rise concrete shear walls using recycled coarse or fine aggregates were investigated. Eight low rise Recycled Aggregates Concrete (RAC) shear wall specimens were designed and tested under a cyclic loading. The following parameters were varied: replacement percentages of recycled coarse or fine aggregates, reinforcement ratio, axial force ratio and X-sh...
متن کاملthe washback effect of discretepoint vs. integrative tests on the retention of content in knowledge tests
در این پایان نامه تاثیر دو نوع تست جزیی نگر و کلی نگر بر به یادسپاری محتوا ارزیابی شده که نتایج نشان دهندهکارایی تستهای کلی نگر بیشتر از سایر آزمونها است
15 صفحه اولCRITICAL INCIDENT ANGLE FOR THE MINIMUM COST DESIGN OF LOW, MID AND HIGH-RISE STEEL AND REINFORCED CONCRETE-COMPOSITE BUILDINGS
One of the main tasks of engineers is to design structural systems light and economic as possible, yet resistant enough to withstand all possible loads arising during their service life and to absorb the induced seismic energy in a controlled and predictable fashion. The traditional trial-and-error design approach is not capable to determine an economical design satisfying also the code require...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ingeniería e Investigación
سال: 2014
ISSN: 2248-8723,0120-5609
DOI: 10.15446/ing.investig.v34n1.40726