Strength evolution of cyclic loaded LSI-based C/C-SiC composites
نویسندگان
چکیده
منابع مشابه
Comparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites
In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...
متن کاملComparisons of Damage Evolution between 2D C/SiC and SiC/SiC Ceramic-Matrix Composites under Tension-Tension Cyclic Fatigue Loading at Room and Elevated Temperatures
In this paper, comparisons of damage evolution between 2D C/SiC and SiC/SiC ceramic-matrix composites (CMCs) under tension-tension cyclic fatigue loading at room and elevated temperatures have been investigated. Fatigue hysteresis loops models considering multiple matrix cracking modes in 2D CMCs have been developed based on the damage mechanism of fiber sliding relative to the matrix in the in...
متن کاملDevelopment of Liquid-silicon-impregnated C/c-sic Composites for High- Temperature Heat Transport a Unit Cell of an Lsi C/c-sic Plate Heat Exchanger
This report summarizes a phased research plan that has been developed under support from Sandia National Laboratory, as a part of planning efforts for nuclear hydrogen production, to investigate the use of liquid-silicon-impregnated (LSI) composites for the development of compact and inexpensive heat exchangers, piping, vessels and pumps capable of operating in the temperature range of 800 to 1...
متن کاملInvestigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method
Abstract The main goal of this study is optimization of densification of ZrB2-SiC composites reinforced with chopped Cf prepared by SPS. Taguchi method is employed as statistical design of experiment (DOE) to optimize densification parameters including SiC, Cf, MoSi2, HfB2 and ZrC content, milling time of Cf and SPS parameters such as temperature, time and pressure. Each of these factors ...
متن کاملHigh Thermal Conductivity SiC/SiC Composites for Fusion Applications
SiC-SiC composites offer excellent potential for fusion energy as well as numerous commercial applications. High manufacturing cost and very low through-the-thickness (transverse) thermal conductivity (below 15 W/mK) hinders wider applications of SiC/SiC composites. To overcome these obstacles, a low-cost, Chemical Vapor Reaction (CVR) process was developed to fabricate crystalline, high purity...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics International
سال: 2016
ISSN: 0272-8842
DOI: 10.1016/j.ceramint.2016.06.061