Strength of structural ceramics with micro cracks.
نویسندگان
چکیده
منابع مشابه
Effect of hydrofluoric acid surface treatments on micro-shear bond strength of CAD/CAM ceramics
Introduction Dental ceramics are appreciated as highly esthetic restorative materials that can simulate the appearance of natural dentition better than other materials. The aim of this study was to evaluate the effect of hydrofluoric acid concentration and etching time on micro-shear bond strength (μSBS) to IPS e.max CAD and Vita Mark II of a dual cured resin cement (Panavia F2.0). Methods Th...
متن کاملSurface Acoustic Wave Measurements of Surface Cracks in Ceramics
We have extended our earlier investigation of scattering from surface cracks. In particular, we have studied the change in the reflection coefficient of a Rayleigh wave incident on a half-penny shaped surface crack along with the corresponding change in the acoustic crack size estimates as the cracked sample is stressed to fracture. We have examined in this manner both cracks in annealed sample...
متن کاملCorrosion effect on the flexural strength & micro-hardness of ips e-max ceramics
Objectives: The effect of ceramics construction (pressable, machinable) and corrosion on flexural strength and micro-hardness was studied. Materials & Methods: Two types of ceramics were tested: IPS e-max Press and IPS e-max CAD. Forty samples were constructed and divided into 2 groups according to the type of ceramics. Each group was then subdivided into 2 subgroups. Subgroups 1 were not subje...
متن کاملDevelopment of Superplastic Structural Ceramics
Superplastic structural ceramics (Y-TZP, A1203, Si3N4, and their composites) that can withstand biaxial stretching to large strains have been developed recently. Microstructural design of these ceramics first requires an ultrafine grain size that is stable against coarsening during sintering and deformation. A low sintering temperature is a necessary, but not a sufficient, condition for achievi...
متن کاملBroadline NMR of Structural Ceramics
Magic angle spinning (MAS) has become the most widely used NMR technique for the study of inorganic solids. This popularity has come about because MAS removes the effects of chemical shift anisotropy, permitting acquisition of chemical shift spectra in these materials. However, there are two weaknesses to the MAS technique, which are accentuated in the study of structural ceramics. The first di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1987
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.53.267