Strengthening of Mg–Al–Ca alloys with C15 and C36 Laves phases

نویسندگان

چکیده

Abstract Laves phases such as CaMg 2 (C14), Ca(Al,Mg) (C36), and CaAl (C15) have high melting points, hardness at room elevated temperatures, but are inherently brittle. Cast Mg–Al–Ca alloys having phase skeleton thus good creep properties limited ductility. An understanding of the co-deformation behaviour α-Mg is essential for further improving mechanical performance these alloys. Here, we study a Mg–4.65Al–2.82Ca alloy using micropillar compression in matrix, α-Mg/C36 α-Mg/C15 interfaces C15 combination with scanning electron microscopy. We show that both, C36 phases, provide considerable strengthening to matrix. The amount primarily depends on volume fraction geometry composite micropillars correlates well iso-strain iso-stress bounds predicted composites. Graphical

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The effect of alloying on the properties of (Nb,Ti)Cr2 C15 Laves phases

The effect of composition on the ternary (NbCr2–TiCr2) C15 phase properties has been investigated, focusing upon the defect structure, elastic properties, and mechanical behavior. The C15 phase field is continuous between NbCr2–TiCr2, with a maximum phase field width of at least 7 at.% solubility. The defect mechanism is governed by anti-site constitutional defects for all alloys. Mechanically,...

متن کامل

Irradiation-induced formation of nanocrystallites with C15 Laves phase structure in bcc iron.

A three-dimensional periodic structure is proposed for self-interstitial clusters in body-centered-cubic metals, as opposed to the conventional two-dimensional loop morphology. The underlying crystal structure corresponds to the C15 Laves phase. Using density functional theory and interatomic potential calculations, we demonstrate that in α-iron these C15 aggregates are highly stable and immobi...

متن کامل

Microstructural evolution of body-centered cubic structure related Ti–Zr–Ni phases in non-stoichiometric Zr-based Zr–Ti–Mn–V–Ni hydride electrode alloys

Non-stoichiometric Zr-based alloys were prepared, and the corresponding electrochemical properties were characterized as hydride electrode alloys. The microstructure and chemical composition of non-stoichiometric Zr–Ti–Mn–V–Ni hydride electrode alloys were systematically investigated by x-ray Rietveld refinement, transmission electron microscopy (TEM), and energy dispersive spectroscopy under T...

متن کامل

Strengthening Mechanisms in the Aged 2024 and 7075 Aluminium Alloys

Aluminum 2024 and 7075 alloys which are widely used in aerospace and marine applications were chosen to investigate their strengthening mechanisms. Using differential thermal analysis (DIA), metallography and tension tests, the best solutionizing conditions were determined to be 500±5°C and 2 hours for 2024 and 480?±5°C and 1 hour for 7075 alloy. Aging was performed in the range of 100 to 200°C...

متن کامل

Factors affecting the room-temperature mechanical properties of TiCr2-base Laves phase alloys

Various effects on the room-temperature mechanical properties of TiCr2-base alloys have been assessed in efforts to improve the toughness of Laves phase intermetallics (AB2). Systematic studies were performed on: (i) single-phase stoichiometric and nonstoichiometric TiCr2, (ii) TiCr2-base ternary Laves phases, and (iii) two-phase binary alloys containing TiCr2. In order to make quantitative com...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Materials Research

سال: 2023

ISSN: ['0884-1616', '1092-8928', '0884-2914', '1091-8876', '2044-5326']

DOI: https://doi.org/10.1557/s43578-023-01082-x