Stress Analysis of Bimaterial Strip with Debondings under Tension
نویسندگان
چکیده
منابع مشابه
Composite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملTension Control with ARHC Scheme for Hot Strip Finishing Mills
This paper presents a design procedure of the ARHC(Adaptive Receding Horizon Control) of the looper-tension controller in hot strip finishing mill. The controller is applied to satisfy the constraints of the control input and attenuate the disturbance of the actuator. The system matrices of the looper model are periodically updated during online simulation. Moreover the closed loop stability of...
متن کاملEvaluation of stress distribution in bolted steel angles under tension
The stress distribution in the vicinity of connections in a bolted steel angle is non-uniform because of the coupled effects of connection eccentricity, shear lag and stress concentrations. Although, some researchers have attempted finite element analysis, stipulations in various codes and specifications regarding the design of angle tension members are primarily based on the experimental studi...
متن کاملSensor Diaphragm Under Initial Tension: Linear Analysis
-In this paper, we present recent efforts conducted to investigate the dynamic behavior of a sensor diaphragm under initial tension. A comprehensive mechanics model based on a plate with in-plane tension is presented and analyzed to examine the transition from plate behavior to membrane behavior. It is shown that for certain tension parameter values, it is appropriate to model the diaphragm as ...
متن کاملCompound Strip Method for Plane Stress
The compound strip method (CSM) for plates is an expansion of the finite strip method (FSM) and was developed to incorporate the effects of the support elements in the analysis of linear elastic plate systems. In this paper the CSM is further expanded to analyze structures such as stiffened plates under loads in the plane of the plate or the so called plane-stress condition. Examples of these t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME international journal. Ser. A, Mechanics and material engineering
سال: 1996
ISSN: 1340-8046
DOI: 10.1299/jsmea1993.39.2_157