Stress concentration around a circular hole of graphite-epoxy laminates under uniform tension or bolt load.
نویسندگان
چکیده
منابع مشابه
Stress and Load-displacement Analysis of Fiber- Reinforced Composite Laminates with a Circular Hole under Compressive Load
This paper is focused on the analysis of stress-strain and displacement for compressive load on the fibrereinforced composite laminates. Three different orientations of fibers are analyzed with and without the circular cut-outs. Also different dimensions of circular cut-outs are applied on the laminates at different compressive loading conditions. This analysis is carried out using the finite e...
متن کاملComposite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملMeasurement of Variation in Fracture Strength and Calculation of Stress Concentration Factor in Composite Laminates with Circular Hole
In this research, residual strength and stress concentration factor of laminated composites with a circular open hole are studied analytically, numerically and experimentally. The numerical study was carried out using the finite element method. Moreover an analytical study was carried out with developing of point stress criterion. Mechanical testing was performed to determine the un-notched ten...
متن کاملFatigue Life of Graphite/epoxy Laminates Subjected to Tension- Compression Loadings
A recent two-parameter fatigue model, aimed at the prediction of the fatigue behaviour of composite materials, was applied to fatigue results available in the literature, concerning graphite/epoxy laminates subjected to tension-compression loadings. It was found that the model, successfully applied in the case of tension-tension and compression-compression fatigue, also works when the sign of s...
متن کاملStress Concentration Factor in a Functionally Graded Material Plate around a Hole
Stress concentration factors have been examined in a functionally graded material (FGM) plate with central holes in different shapes in this essay. The material properties change along the thickness of plate. ABAQUS software has been utilized for modeling of problem in which subroutine of ABAQUS sub-program was used for modeling of the targeted material. The considering shapes for hole in plate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Aeronautical and Space Sciences
سال: 1986
ISSN: 0021-4663
DOI: 10.2322/jjsass1969.34.436