Stress Concentration Factors for Multi-planar Tubular Joints Subjected to Axial Loading
نویسندگان
چکیده
منابع مشابه
Stress Concentration Factors in Uniplanar Tubular KT-Joints of Jacket Structures Subjected to In-Plane Bending Loads
In the present research, data extracted from the stress analysis of 46 finite element models, verified using test results obtained from an experimental investigation, were used to study the effect of geometrical parameters on the chord-side stress concentration factors (SCFs) of central and outer braces in uniplanar tubular KT-joints of offshore structures subjected to four different types of i...
متن کاملDegree of Bending (DoB) in Tubular KT-Joints of Jacket Structures Subjected to Axial Loads
The fatigue life of tubular joints commonly found in offshore industry is not only dependent on the value of Hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stres...
متن کاملHot Spot Stress Determination for a Tubular T-Joint under Combined Axial and Bending Loading
Finite element analysis of a tubular T-joint subjected to various loading conditions including pure axial loading, pure in-plane bending (IPB) and different ratios of axial loading to in-plane bending loading has been carried out. This effort has been established to estimate magnitudes of the peak hot spot stresses (HSS) at the brace/chord intersection and to find the corresponding locations as...
متن کاملConcrete Filled Tubular Bracing Subjected to Cyclic Loading
The energy absorption of concrete filled, hollow-steel bracing was analyzed respect to geometric and mechanical parameters including the width-to-thickness section ratio, slenderness level, and strength of the steel and concrete. Local buckling and ductility were also investigated with respect to variation in the cross-section. The infill increased the compression resistance, even after multipl...
متن کاملDynamic response of tubular joints with an annular void subjected to a harmonic axial load
Dynamic responses of adhesively bonded tubular joints subjected to a harmonic axial load were evaluated with the use of a shear lag model. Adherents were assumed to be elastic and the adhesive was taken to be a viscoelastic material. Effects of tubular joint geometries, material properties and adhesive properties on the dynamic response of the system were investigated. The results showed that t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2020
ISSN: 2267-1242
DOI: 10.1051/e3sconf/202021303014