Stress Concentration Factors for Sholder Fillet in Flat Bars under Tension
نویسندگان
چکیده
منابع مشابه
Composite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملDynamic Stress Concentration Factor in the Strip Plate with Fillet
Dynamic and static stress concentration factors ao, and as generated at a fillet part are observed by photoelastic method, and the comparison between two different factors is carried out. Next, the reflection coefficient A is calculated using the height of incident and reflected waves measured by the strain gauge. As the result, following relationship a= ( I+ A )as is derived experimentally. Th...
متن کاملInfluence of Stress Concentration Factor on Magnetic Memory Effect of Steel Samples under Dynamic Tension Load
Under the excitation of geomagnetic field, normal component of surface scattering magnetic field intensity Hp(y) changes of steel tensile samples with different stress concentration factors α were studied. Constant amplitude sinusoidal tensile load cycles were applied on 18CrNi4A steel plate samples whose α were respectively 1, 3 and 5. Then the correlation of Hp(y) value changes with loading c...
متن کاملDetermination of stress concentration factors on flat plates of structural steel
The aim of this study was to determine stress concentration factors using finite element software; within the most outstanding results is ANSYS software validation for the determination of concentration factors in flat plates with a central hole subjected to axial load; Since it could be statistically demonstrated that there aren ́t significant differences between the theoretical data and the da...
متن کاملStress Concentration Factors in Spherical Vessels with Single Oblique Nozzle
Finite element method is employed to analyze the spherical vessel intersected by an oblique cylindrical nozzle. In this survey the stress and strain distributions on acute and obtuse sides of the connection under internal pressure are studied widely although axial and moment loadings on the nozzle are also studied briefly. Stress concentration factors for a wide range of geometrical ratios in t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1970
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.36.871