STRESS CONCENTRATION IN RIGID FRAME CORNER CONNECTION WITH CIRCULAR TUBULAR COLUMN
نویسندگان
چکیده
منابع مشابه
Finite element analysis of a rigid beam to column connection reinforced with channels
Abstract: This research work presents a new rigid connection constructed with channels. In order to assess its hysteresis behavior, three specimens with different cover plates and six specimens with different panel zone thickness have been considered. The energy absorbed by the connection and the behavior of the panel zone were studied during cyclic loading and compared with those of connectio...
متن کاملNEW RCS Frame Connection in Structures
Hybrid moment frame come together with reinforced concrete columns with structural steel beams (RCS). This Composite system provides several key advantages over current steel or concrete moment resisting frame. Past studies have shown this system to be efficient in both design and building stage while able to keep sufficient strength and necessary ductility in seismic zone.Although past researc...
متن کاملEffect of column-foundation connection stiffness on seismic performance of rocking steel braced frame
Residual drifts after severe earthquakes interrupt serviceability of buildings. Retrofitting of such buildings is in many cases very difficult and consumes lots of time and money. Recently, there are some attempts to develop the seismic design procedures to not only satisfy life safety criteria but also lead to more economical buildings. One of these modern methods of improving seismic performa...
متن کاملEffects of Geometric Nonlinearity on Stress Analysis in Large Amplitude Vibration of thin Circular Functionally Graded Plates With Rigid Core
Abstract In this paper , the nonlinear the nonlinear free and forced axisymmetric vibration of a thin circular functionally graded plate with rigid core is formulated in terms of von-Karman’s dynamic equation , and a semi-analytical approach is developed.Functionally graded material (FGM) properties vary through the thickness of the plate.FGM s are spatial composites within which material prop...
متن کاملComposite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Japan Society of Civil Engineers
سال: 1979
ISSN: 1884-4936,0385-5392
DOI: 10.2208/jscej1969.1979.292_29