Stress dissipation characteristics of four implant thread designs evaluated by 3D finite element modeling
نویسندگان
چکیده
منابع مشابه
Influence of three different implant thread designs on stress distribution: A three-dimensional finite element analysis
PURPOSE Clinical success of implant prosthodontics is dependent in part upon the type of implant thread design. The selection of implant thread design plays an important role in the outcome of the treatment. This study was undertaken to evaluate the pattern of stress distribution using a finite element analysis; hence, the area which would be bearing maximum load for a given design would be arr...
متن کاملComparative study of 12 thread shapes of dental implant designs: a three-dimensional finite element analysis
The purpose of this study was to determine the optimal thread shape for an experimental cylinder implant. Twelve three-dimensional finite element models with an implant of different thread shape were created: 1mm, 2mm, and 3mm square designs (S-1, S-2, and S-3); 90, 60, and 30 V-shaped designs (V-1, V-2, and V-3); 45, 30, and 15 buttress designs (B-1, B-2, and B-3); 45, 30, and 15 reverse buttr...
متن کاملStress Distribution in Four Restorative Methods in Endodontically Treated Maxillary Premolar: A 3D Finite Element Analysis
Introduction: the Restoration of endodontically treated teeth is critical, and the Awareness of stresses developed by oblique and vertical forces in restorative methods take a great role in treatment plans. Due to the anatomical shape and inherent form of the stress distribution premolars, could be lost by fractures. Some fractures such as vertical fracture which is probable in...
متن کاملFinite Element Analysis of Different Hip Implant Designs along with Femur under Static Loading Conditions
Background: The hip joint is the largest joint after the knee, which gives stability to the whole human structure. The hip joint consists of a femoral head which articulates with the acetabulum. Due to age and wear between the joints, these joints need to be replaced with implants which can function just as a natural joint. Since the early 19th century, the hip joint arthroplasty has evolved, a...
متن کاملferrule designs and stress distribution in endodontically treated upper central incisors: 3d finite element analysis
objective: the main goal of this study was to evaluate stress distribution of endodonti-cally treated maxillary central incisors restored with glass fiber posts, composite resin cores, and crowns with different ferrule designs. materials and methods: four three-dimensional models of a maxillary central incisor were modeled in solidworks 2006. tooth with no ferrule, tooth with a 2 mm circumferen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Korean Academy of Prosthodontics
سال: 2015
ISSN: 0301-2875,2005-3789
DOI: 10.4047/jkap.2015.53.2.120