STRESS FUNCTION AROUND AN INTERFACE CRACK UNDER UNIFORM TENSION AT INFINITY
نویسندگان
چکیده
منابع مشابه
Interface crack between different orthotropic media under uniform heat flow
In this paper, plane thermo-elastic solutions are presented for the problem of a crack in two bonded homogeneous orthotropic media with a graded interfacial zone. The graded interfacial zone is treated as a nonhomogeneous interlayer having spatially varying thermo-elastic moduli between dissimilar, homogeneous orthotropic half-planes, which is assumed to vary exponentially in the direction perp...
متن کامل3D Stress Distribution Analysis around Blind-holes in Thin Plates Under Non-uniform Tension Loads
A three-dimensional photo elasticity analysis and an interactive finite-element package were used in parallel to analyze the stress distribution on the root of blind-holes in thin plates. Experimental analysis was conducted via stress freezing method. The FEM analysis was performed with the ABAQUS commercial code using material properties obtained experimentally as input. The results showed tha...
متن کاملA boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension
In this work, the mechanism for fracture of brittle substances such as rocks under a uniform normal tension is considered. The oriented straight micro-cracks are mostly created in all the polycrystalline materials resulting from the stress concentrations. The present work focuses on the interactions of the pre-existing micro-cracks, which can grow and propagate within a rock-like specimen. The ...
متن کاملStress Analysis at a Bi-Material Interface Crack-tip
The optical methods of Caustics, Photoelasticity and Isopachics for the evaluation of the stress intensity factors and the distribution of the principal stresses at a bi-material interface crack-tip, were proposed. The caustics, isochromatic and isopachic fringes are developed from the stress field which results from a stress function X(r, ). When the crack-tip, which is perpendicular to interf...
متن کاملCement-Implant Interface Fracture Failure by Crack Initiation Due to Interface Cavity Stress Concentration
Nowadays total joint replacements are widely used in the world, so in average 800,000 joint surgeries are done yearly only in Europe and North America. However implant loosening is and remains as the major issue of all implant failures and therefore causes revision surgery procedures. Studies and experiments have identified poor fixation of implants most likely is the main cause of long term im...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 1994
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.1994.502_23