Stress-Strain Curves under Variable Stresses
نویسندگان
چکیده
منابع مشابه
Modeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کاملModifying Stress-Strain Curves Using Optimization and Finite Elements Simulation Methods
Modifying stress-strain curves is one of the important topics in mechanical engineering and materials science. Real stress-strain curves should be modified after necking point as stress becomes three-dimensional after creation of throat, and consequently, equivalent stress should be used instead of axial one. Also, distribution of triple stresses across throat section is not uniform anymore, an...
متن کاملOn the measurement of stress–strain curves by spherical indentation
It has been proposed that with the appropriate models, instrumented indentation test (IIT) data can be reduced to yield the uniaxial stress–strain behavior of the test material. However, very little work has been done to directly compare the results from uniaxial tension and spherical indentation experiments. In this work, indentation and uniaxial tension experiments have been performed on the ...
متن کاملPhysiology and behavior of Pseudomonas fluorescens single and dual strain biofilms under diverse hydrodynamics stresses.
Three selected Pseudomonas fluorescens strains (the type strain and two strains originally isolated from a dairy processing plant - D3-348 and D3-350) were used to form turbulent and laminar flow-generated biofilms under laboratorial conditions using flow cell reactors with stainless steel substrata. The D3-348 and D3-350 strains were also used to form dual biofilms. Biofilm phenotypic characte...
متن کاملStress Analysis of Rotating Thick Truncated Conical Shells with Variable Thickness under Mechanical and Thermal Loads
In this paper, thermo-elastic analysis of a rotating thick truncated conical shell subjected to the temperature gradient, internal pressure and external pressure is presented. Given the existence of shear stress in the conical shell due to thickness change along the axial direction, the governing equations are obtained based on first-order shear deformation theory (FSDT). These equations are so...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of JSME
سال: 1967
ISSN: 0021-3764,1881-1426
DOI: 10.1299/jsme1958.10.601