Strip Tension Control for a Reversing Cold Mill Using Observer Method
نویسندگان
چکیده
منابع مشابه
a new rolling pressure model for an actual reversing cold rolling strip mill
the forging model for cold rolling is one of rolling models that is used in rolling calculations. in this model,the final rolling pressure is an average value and it is not an accurate model.also by using this model,the firction hill curves are plotted due to the central point of the rolling bite length while frictional stresses intersect at the neutral point.in this study, a new model based on...
متن کاملNonlinear Looper-tension Control for Hot Strip Finishing Mill Using Feedback Linearization
Abstract: This paper studies on the design of a nonlinear controller for the looper-tension system in hot strip finishing mills using a static state feedback linearization and an ILQ(Inverse Linear Quadratic) Optimal Control. Nonlinear dynamic equations of the looper-tension system are analytically linearized by a static feedback linearization algorithm with a compensator. A nonlinear controlle...
متن کاملUsing Experimental Procedure to Improve the Efficiency of the Two Stand Reversing Cold Mill
Production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. This is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. Initially, unsuitable surface roughness, the friction between rolls and the st...
متن کاملUsing Experimental Procedure to Improve the Efficiency of the Two Stand Reversing Cold Mill
Production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. This is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. Initially, unsuitable surface roughness, the friction between rolls and the st...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Society of Instrument and Control Engineers
سال: 1992
ISSN: 0453-4654
DOI: 10.9746/sicetr1965.28.825