Structural Analysis and Optimal Design for Water Tube Panel in an Alkali Recovery Boiler
نویسندگان
چکیده
منابع مشابه
Selecting Optimal Dimensions of Internal Tube in Tube-in-Tube Structural Systems Based on Structural Parameters
Tubular structural systems are one of the most common types of systems in high-rise structures. In the early days of this system, there were imperfections in its design which were overcome over time. The most important modification to rectify these defects is the use of a series of internal frames in addition to the peripheral frames and new systems in the center of the plan to eliminate design...
متن کاملdevelopment and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولMethods for the Analysis of Boiler Water
Recommendations for Boilers up to 250 psig Ca 0.40 2.50 Na. 0.46 2.17 CaO. 0.56 1. 79 NaOH. 0.80 1. 25 Ca(HC031. . 1. 62 0.617 Na 2C03 1. 06 0.943 CaSO. 1. 36 0.735 NaHC03 1. 68 0.60 CaCl2 1.11 0.901 Na 2SO•. 1.42 0.704 Mg . 0.24 4.17 NaCI 1.17 0.855 MgO 0.40 2.48 CO2 , 0.44 2.27 MgC03 • 0.84 1.19 C03 0.60 1. 67 Mg(HC03) 2 ' 1. 46 0.685 HC03 1. 22 0.82 MgSO•. 1. 20 0.833 SO•. 0.96 1.04 MgCl2 0....
متن کاملStructural and Functional Analysis of an Industrial, Flexible, and Demountable Wall Panel System (RESEARCH NOTE)
Building waste is a critical issue in current construction. Innovative design strategies are required to reduce the depletion of valuable materials and resources through providing flexible and versatile structures. This study focuses on the development of an industrial, flexible, and demountable wall panel construction system. The panel system consists of concrete blocks with steel connectors t...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering
سال: 2010
ISSN: 1947-3931,1947-394X
DOI: 10.4236/eng.2010.25046