Structural characterization and mechanical properties of pearlite – Enhanced micro-alloyed ductile irons
نویسندگان
چکیده
منابع مشابه
Influence of 1 wt-% addition of Ni on structural and mechanical properties of ferritic ductile irons
To cite this version: Lacaze, Jacques and Larrañaga, Peio and Asenjo, Iker and Suarez, Ramon and Sertucha, Jon Influence of 1 wt-% addition of Ni on structural and mechanical properties of ferritic ductile irons. (2012) Materials Science and Technology, Vol. 28 (n° 5). pp. 603-608. ISSN 0267-0836 Open Archive Toulouse Archive Ouverte (OATAO) OATAO is an open access repository that collects the ...
متن کاملGraphite Phase Formation in Al Alloyed Ductile Irons
The influence of aluminum, within the range of 0.08 - 6.16 wt.%, on the microstructure and hardness of as-cast ductile cast iron has been studied. A number of irons of different composition have been made by green sand casting and gravity die casting of appropriate design to provide the experimental materials. It has been found that Al addition and higher cooling rates in permanent mould castin...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولStructural and Mechanical Characterization of Austempered Cu - Sn Ductile Iron Alloys
The effect of heat treatment and alloying elements of copper and tin on the microstructure and mechanical properties of austempered ductile cast iron alloys is investigated. The austenitizing temperature of 890°C, the isothermal transformation (austempering) temperatures of 285, 335 and 375°C, and austempering times of 15, 30, 75 and 150 minutes are studied. The alloying elements of copper and ...
متن کاملMicro Laser Welding of AISI 430 Ferritic Stainless Steel: Mechanical Properties, Magnetic Characterization and Texture Evolution
In the present work, a high power Nd:YAG laser has been employed to weld AISI 430 ferritic stainless steel thin sheets. Optical microscopy was used to study the microstructural evolutions during laser welding. Tensile test and microhardness measurement were employed in order to investigate the mechanical behaviors of welds. Also, vibrational sample magnetometry was used for characterizing magne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of King Saud University - Engineering Sciences
سال: 2020
ISSN: 1018-3639
DOI: 10.1016/j.jksues.2018.11.008