Structural characterization of plasma-polymerized allylamine.

A multi-ion beam microanalysis approach for the characterization of plasma polymerized allylamine films

A full characterization of plasma polymerized biofunctional films requires the use of multianalytical approaches to determine the chemical composition, topography and potential interaction mechanisms of such films with biomolecules and cells. In this work we aim at underlining the versatility of ion-based techniques to contribute to the chemical characterization of plasma polymerized surfaces. ...

Ultra-thin plasma polymerized allylamine films for cardiovascular stent coating

Capacitance-Voltage Characterization of Pulsed Plasma Polymerized Allylamine Dielectrics for Flexible Polymeric Field Effect Transistors

Polyallylamine films, deposited on Si wafers by radio frequency (RF) pulsed plasma polymerization (PPP), were employed as insulating layers of metalinsulator-semiconductor (MIS) capacitors. The insulating polymer films were deposited at plasma reactor temperatures of 25°C and 100°C. Multiple frequency capacitance-voltage (C-V) measurements indicated that an in-situ heat treatment during film de...

Plasma Polymerized Allylamine Modification of Quartz Particles for Removal of Water Contaminants

The availability of clean drinking water in rural areas, disaster zones and third world countries is a major concern. A number of purification methods are available but are often energy intensive and only feasible for highly populated areas. Simple and cheap decentralized water treatment systems can however be produced for isolated locations. Quartz particles have been modified via an inductive...

Plasma Polymerized Thin Films Materials: Synthesis, Characterization, and Application Tests

Organic–inorganic hybrid co-polymer thin films were deposited on silicon(100) substrates under the several ratio of TEOS (tetraethoxysilane) against cyclohexene by plasma enhanced chemical vapour deposition (PECVD) method. Toluene and TEOS were utilized as organic and inorganic precursors each, and hydrogen and argon were also used as a bubbler and carrier gases, respectively. In order to compa...