Structural Failure Analysis and Numerical Simulation of Microaccelerometers under Impulsive Loading
نویسندگان
چکیده
منابع مشابه
Numerical analysis of slide-head-toppling failure
In layered and blocky rock slopes, toppling failure is a common mode of instability that may occur in mining engineering. If this type of slope failure occurs as a consequence of another type of failure, it is referred to as the secondary toppling failure. “Slide-head-toppling” is a type of secondary toppling failures, where the upper part of the slope is toppled as a consequence of a semi-circ...
متن کاملNumerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading
In this article, the results of a study on energy absorption characteristics of foam-filled thin-walled structures with finite element analysis have been presented. Four specimens of thin walled structures have been filled with uniform foam and three specimens have been filled with linear four-layered foam. Also, eight layers HLH (High-Low-High) and eight layers LHL (Low-High-Low) have been sim...
متن کاملNumerical Prediction of the Mechanical Failure of the Intervertebral Disc under Complex Loading Conditions
Finite element modeling has been widely used to simulate the mechanical behavior of the intervertebral disc. Previous models have been generally limited to the prediction of the disc behavior under simple loading conditions, thus neglecting its response to complex loads, which may induce its failure. The aim of this study was to generate a finite element model of the ovine lumbar intervertebral...
متن کاملFailure Test and Finite Element Simulation of a Large Wind Turbine Composite Blade under Static Loading
This study presented a failure analysis of a 52.3 m composite wind turbine blade under static loading. Complex failure characteristics exhibited at the transition region of the blade were thoroughly examined and typical failure modes were indentified. In order to predict multiple failure modes observed in the tests and gain more insights into the failure mechanisms of the blade, a Finite Elemen...
متن کاملNumerical Simulation and Experimental Researches on the LED Reliability under Temperature Loading
The reliability problem must be solved for achieving large-scale application about LEDs, and the temperature is a key factor to affect LED reliability. In order to find the temperature effects on the module of high-power light emitting diodes (LEDs), a finite element approach was used to study the reliability problems of LEDs under high temperature and low temperature. A thermal shock experimen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Nonlinear Sciences and Numerical Simulation
سال: 2002
ISSN: 2191-0294,1565-1339
DOI: 10.1515/ijnsns.2002.3.3-4.311