Structural Optimization of Structured Carbon-Based Energy-Storing Composite Materials Used in Space Vehicles
نویسندگان
چکیده
منابع مشابه
Energy Storing Cryogenic Carbon Capture
The Cryogenic Carbon CaptureTM (CCC) process is a retrofit, post-combustion technology that desublimates CO2 in the flue gas and produces a separate liquid CO2 product. This project focuses on the energy-storing version of this process, CCC ESTM. During off-peak hours, CCC ESTM generates more refrigerant than is needed for the process, which is stored in an insulated vessel as a liquid at the l...
متن کاملMultifunctional composite materials for energy storage in structural load paths
This paper presents an overview of the research performed to date by a Swedish interdisciplinary team of scientists striving to develop multifunctional composite materials for storage of electric energy in mechanical load paths. To realise structural batteries from polymer composites, research pursued on carbon fibres for use as negative electrode in the battery as well as on polymer electrolyt...
متن کاملeconomic optimization and energy consumption in tray dryers
دراین پروژه به بررسی مدل سازی خشک کردن مواد غذایی با استفاده از هوای خشک در خشک کن آزمایشگاهی نوع سینی دار پرداخته شده است. برای آنالیز انتقال رطوبت در طی خشک شدن به طریق جابجایی، یک مدل لایه نازک برای انتقال رطوبت، مبتنی بر معادله نفوذ فیک در نظر گفته شده است که شامل انتقال همزمان جرم و انرژی بین فاز جامد و گاز می باشد. پروفایل دما و رطوبت برای سه نوع ماده غذایی شامل سیب زمینی، سیب و موز در طی...
15 صفحه اولStoring elastic energy in carbon nanotubes
The potential performance of carbon nanotubes (CNTs) as springs for elastic energy storage is evaluated. Models are used to determine an upper bound on the energy density that can be stored in defect-free individual CNTs and in assemblies of such CNTs. The models reveal that optimal energy density may be achieved in small-diameter single-walled CNTs loaded in tension, with a maximum theoretical...
متن کاملCarbon Nanotube Enhanced Composite Materials
Non covalent functionalization by π stacking was accomplished by treating multi walled carbon nanotubes (MWNTs) through the use of Kentera, a conjugate rigid rod polymer. The functionalized MWNTs were then introduced into the epoxy resins through a combination of shear and elongation forces. The resulting epoxy resin (containing MWNTs) was then impregnated with carbon fiber under hot-melt condi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Biomaterials & Functional Materials
سال: 2016
ISSN: 2280-8000,2280-8000
DOI: 10.5301/jabfm.5000314