Structural study of Cu-Cr mechanical alloying powders
نویسندگان
چکیده
منابع مشابه
Behavior of Cu-Cr Powder Mixtures During Mechanical Alloying (TECHNICAL NOTE)
In the present work, the behavior of Cu-Cr powder mixtures during mechanical alloying has been studied. The powder mixtures with 1, 3 and 6 weight percents of Cr in Cu were treated. They were milled in a ball mill with two different speeds of 250 and 500 rpm using equal numbers of 1 and 2 centimeters balls. The weight ratio of balls to powders was 10 to 1 under argon atmosphere. Ethanol was use...
متن کاملStructural study of Cu(2-x)Se alloys produced by mechanical alloying.
The crystalline structures of the superionic high-temperature copper selenides Cu(2-x)Se (0 < x < 0.25) produced using mechanical alloying were investigated using X-ray diffraction (XRD). The measured XRD patterns showed the presence of peaks corresponding to the crystalline superionic high-temperature alpha-Cu(2)Se phase in the as-milled sample, and its structural data were determined by means...
متن کاملStudy of Structural Changes in Cu-Ni-Zn Mixture in Producing of Nickel Silver Alloys by Mechanical Alloying
Production of nickel-silver by mechanical alloying was investigated. Effects of parameters such as milling duration, ball to powder weight ratio, and chemical composition on mechanical alloying process, and alloy's color and microstructure were studied. The milled powders were characterized, using XRD and SEM. Results showed that nickel-silvers could be produced by mechanical alloying in a wide...
متن کاملStudy of Structural Changes in Cu-Ni-Zn Mixture in Producing of Nickel Silver Alloys by Mechanical Alloying
Production of nickel-silver by mechanical alloying was investigated. Effects of parameters such as milling duration, ball to powder weight ratio, and chemical composition on mechanical alloying process, and alloys color and microstructure were studied. The milled powders were characterized, using XRD and SEM. Results showed that nickel-silvers could be produced by mechanical alloying in a wide ...
متن کاملInvestigation on Mechanical and Electrical Properties of Cu-Ti Nanocomposite Produced by Mechanical Alloying
In this paper, Cu-Ti nanocomposite synthesized via ball milling of copper-titanium powders in 1, 3, and 6 of weight percentage compounds. The vial speed was 350 rpm and ball to powder weight ratio kept at 15:1 under Argon atmosphere, and the time of milling was 90 h. Obtained powders were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), and dynamic light scattering (DLS)....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Revista de Metalurgia
سال: 2006
ISSN: 1988-4222,0034-8570
DOI: 10.3989/revmetalm.2006.v42.i5.31