Structure Analysis and Optimization Design of Driving Foot Based on ANSYS Workbench

ANSYS Workbench User's Guide

Finite Element Analysis Of Disc Brake By ANSYS Workbench

The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...

Design Optimization of Actuators Using ANSYS

Research and development on actuators has been accelerated with the aid of virtual prototyping software, like ANSYS. This is illustrated with two successful cases using ANSYS to design and optimize micro-electromechanical actuators. The first case is topology optimization of head suspension assembly for hard disk drive. The second case is design optimization of polymeric thermal micro-actuator....

Component Mode Synthesis in ANSYS Workbench Simulation

At ANSYS Workbench 11.0, the ANSYS Rigid Dynamics add-on module enables users to define joint connections in complex kinematic assemblies. This ability to model rigid and flexible parts in ANSYS Workbench Simulation via joints is beneficial since the rigid parts are modeled with mass and rigid links (that is, rigid contact elements), thus providing load transfer capabilities and allowing users ...

fabrication of new ion sensitive field effect transistors (isfet) based on modification of junction-fet for analysis of hydronium, potassium and hydrazinium ions

a novel and ultra low cost isfet electrode and measurement system was designed for isfet application and detection of hydronium, hydrazinium and potassium ions. also, a measuring setup containing appropriate circuits, suitable analyzer (advantech board), de noise reduction elements, cooling system and pc was used for controlling the isfet electrode and various characteristic measurements. the t...