Structure and Physical Properties of Telechelic Polyurethane Elastomers.
نویسندگان
چکیده
منابع مشابه
Specific interactions, structure and properties in segmented polyurethane elastomers
Two sets of segmented polyurethane (PU) elastomers were prepared from 4,4!-methylenebis(phenyl isocyanate) (MDI), 1,4-butanediol (BD) and a polyester or a polyether polyol, respectively. The molecular mass of both polyols was 1000 g/mol. The stoichiometric ratio of isocyanate and hydroxyl groups was 1 and the polyol/total diol ratio changed from 0 to 1 in 0.1 steps. One step bulk polymerization...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولInfluence of Polyurethane Properties on Mechanical Performances of Magnetorheological Elastomers
Magnetorheological elastomers (MREs) are mainly composed of magnetizable particles and elastic polymer. The polymer matrix plays an important role in mechanical performances of MREs. In this study, the polyurethane (PU), which is synthesized by using toluene diisocyanate (TDI) and poly (propylene glycol) (PPG-220), is selected as a matrix because it has better degradation stability than natural...
متن کاملMeasurement of physical properties of polyurethane plaster
Physical properties of building materials can be defined by material coefficients. The material coefficients examined were: coefficient of mean density, coefficient of specific heat capacity, coefficient of thermal conductivity, and coefficient of thermal diffusivity. Physical properties of a newly-developed material (polyurethane plaster), were subjected to nondestructive analysis. The same me...
متن کاملInfluences of NCO/OH and triol/diol Ratios on the Mechanical Properties of Nitro-HTPB Based Polyurethane Elastomers
The present study describes the effect of NCO/OH and triol/diol ratios on the mechanical properties of Nitro functionalized Hydroxyl-terminated polybutadiene (Nitro-HTPB) elastomers. The progress of the cure reaction of Nitro-HTPB and toluene diisocyanate (TDI) is evaluated by following up the variations in the IR absorption bands of the NCO stretching and the CO ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Kobunshi
سال: 1997
ISSN: 0454-1138,2185-9825
DOI: 10.1295/kobunshi.46.753