Structure of Molten Iron Chloride

Density of Molten Terbium Chloride

Anhydrous (99.99%) TbCl3 was obtained from Aldrich (Milwaukee, WI, USA) and used without further purifications. It was handled in an argon-filled dry box with a water content < 2 ppm and an oxygen content < 1 ppm. A 166Ho radiation source (2.27 MBq) was used because of its desirable decay characteristics (t1/2 = 1200y, up to 8 photons per disintegration, more than 10% branching ratio). A multi-...

Shear viscosity of molten sodium chloride

Secondary aluminium-iron (III) chloride batteries with a low temperature molten salt electrolyte

Secondary aluminium-iron (III) chloride batteries using a low temperature molten salt electrolyte were constructed and tested. Discharge current densities were in the range 5 to 100mA ( ~ 1 to 2 0 m A c m 2 ; ~ C/4 to 5C); charging currents were 5 m A (C/4 toC/2). Utilization of the positive electrode reactant was low due to the discharge rates and loading procedure. The mode for self discharge...

Conductivity of molten sodium chloride in an alternating electric field

Redox Potentials of Samarium and Europium in Molten Lithium Chloride

The samarium (III)/(II) and europium (III)/(II) redox potentials in molten lithium chloride were measured using the direct potentiometric method in the temperature range from 923 to 1094 K. Glassy carbon was used as the indifferent working electrode, and the standard chlorine electrode as a reference. The total concentration of rare-earth chlorides dissolved in molten lithium chloride did not e...