Structure of nanocrystalline spinel ferrite produced by high-energy ball-milling method
نویسندگان
چکیده
منابع مشابه
Atomic-scale structure of nanocrystalline ZrO2 prepared by high-energy ball milling
The atomic-scale structure of nanocrystalline ZrO2 obtained by ball milling has been studied using highenergy x-ray diffraction and the atomic pair distribution function technique. The studies show that, upon relatively short milling times, the parent crystalline material, monoclinic ZrO2, evolves into a nanocrystalline phase that is locally similar to monoclinic zirconia but shows a cubic-type...
متن کاملMicrostructure characterization and cation distribution of nanocrystalline magnesium ferrite prepared by ball milling
Nanocrystalline magnesium ferrite is synthesized by high-energy ball milling. The formation of nanocrystalline ferrite phase is observed after 3 h of milling and its content increases with milling time. The structural and microstructural evolution of the nanophase have been studied by X-ray powder diffraction and the Rietveld method. After 3 h of milling, ferrite phase (mixed spinel) nucleates ...
متن کاملPhonon density of states of nanocrystalline Fe prepared by high-energy ball milling
We performed inelastic neutron scattering measurements on nanophase Fe powders prepared by high-energy ball milling. Neutron energy loss spectra were measured for two states of the material: ~1! as milled, when the material had a characteristic nanocrystallite size of 12 nm; and ~2! annealed, when the material had a characteristic crystallite size of 28 nm. The longitudinal peak in the phonon d...
متن کاملAl4C3/Ag Formation in an Aluminum Composite Produced by High-Energy Ball Milling
Aluminum and its alloys have a lot of industrial applications due to their appropriate physical and chemical characteristics. However, those present a modest mechanical performance. One method to improve its strenght is the addition of hard insoluble particles as: carbides (Al4C3, TiC), oxides (Al2O3) or nitrides (TiN, AlN), which can difficult the dislocation movement at atomic level, resultin...
متن کاملFormation of glassy Ti50Cu20Ni24Si4B2 alloy by high-energy ball milling
The elemental powder mixtures with a nominal composition of Ti50Cu20Ni24Si4B2 can be amorphized under high-energy ball milling. A well-defined glass transition before crystallization appears in the obtained amorphous phase during heating in a differential scanning calorimeter. Awide supercooled liquid region DTx is available to be about 57 K. Crystallization of the ballmilled amorphous phase wa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Crystallographica Section A Foundations of Crystallography
سال: 1996
ISSN: 0108-7673
DOI: 10.1107/s0108767396084887