Structure–property relationships of reactively compatibilized PHB/EVA/starch blends
نویسندگان
چکیده
منابع مشابه
Compatibilized Immiscible Polymer Blends for Gas Separations
Membrane-based gas separation has attracted a great deal of attention recently due to the requirement for high purity gasses in industrial applications like fuel cells, and because of environment concerns, such as global warming. The current methods of cryogenic distillation and pressure swing adsorption are energy intensive and costly. Therefore, polymer membranes have emerged as a less energy...
متن کاملVarying the Blending Protocol to Control the Morphology of Model Compatibilized Polymer Blends
The structure of an oil/water emulsion is known to depend on its preparation method. Here, we test whether the preparation protocol can be used to control the morphology of ‘‘model’’ blends of immiscible polymers compatibilized by a diblock copolymer. Two preparation protocols were tested. In the ‘‘double blending’’ protocol, a droplet-matrix blend was blended with additional drop-phase fluid. ...
متن کاملPreparation of High Density Polyethylene/Waste Polyurethane Blends Compatibilized with Polyethylene-Graft-Maleic Anhydride by Radiation
Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation ...
متن کاملAn investigation on chloroprene-compatibilized acrylonitrile butadiene rubber/high density polyethylene blends
Blends of acrylonitrile butadiene rubber/high density polyethylene (NBR/HDPE) compatibilized by Chloroprene rubber (CR) were prepared. A fixed quantity of industrial waste such as marble waste (MW, 40 phr) was also included. The effect of the blend ratio and CR on cure characteristics, mechanical and swelling properties of MW-filled NBR/HDPE blends was investigated. The results showed that the ...
متن کاملMechanical Properties and Morphologies of Carboxyl-Terminated Butadiene Acrylonitrile Liquid Rubber/Epoxy Blends Compatibilized by Pre-Crosslinking
In order to enhance the compatibilization and interfacial adhesion between epoxy and liquid carboxyl-terminated butadiene acrylonitrile (CTBN) rubber, an initiator was introduced into the mixture and heated to initiate the cross-linking reaction of CTBN. After the addition of curing agents, the CTBN/epoxy blends with a localized interpenetrating network structure were prepared. The mechanical p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Carbohydrate Polymers
سال: 2014
ISSN: 0144-8617
DOI: 10.1016/j.carbpol.2014.02.058