Strut-and-tie model for externally bonded CFRP-strengthened reinforced concrete deep beams based on particle swarm optimization algorithm: CFRP debonding and rupture
نویسندگان
چکیده
منابع مشابه
Strut Deformation in CFRP-Strengthened Reinforced Concrete Deep Beams
Strut-and-tie model (STM) method evolved as one of the most useful designs for shear critical structures and discontinuity regions (D-regions). It provides widespread applications in the design of deep beams as recommended by many codes. The estimation of bottle-shaped strut dimensions, as a main constituent of STM, is essential in design calculations. The application of carbon fibre reinforced...
متن کاملDebonding-Related Strain Limits for Externally Bonded FRP Sheets in Flexurally Strengthened Reinforced Concrete Beams
Debonding problems of externally bonded fiber reinforced polymer (FRP) sheets in flexurally FRP-strengthened reinforced concrete (RC) beams have been a concern and a research challenge since their application of this strengthening technique. Intermediate crack induced debonding is the most common failure mode which is that the debonding initiates at the critical flexural-shear or flexural crack...
متن کاملcfrp eeffects on reinforced concrete deep beams
deep beams are type of beams which their behavior is different from conventional beams because of their particular type of geometry. in this paper, the retrofitting of these beams is considered and 10 deep beams are tested experimentally and discussed about retrofitting methods. experimental studies indicate that the use of cfrp bands in the direction perpendicular to diagonal cracks in compari...
متن کاملNumerical Simulation of Debonding Failure of Reinforced Concrete Beams Strengthened with Externally Bonded Frp
As the life age of the existing structures are required to meet the changing demands on civil infrastructures. So strengthening and retrofitting are required. Recently many techniques to strengthen the reinforced concrete beams in flexural by using fiber reinforced polymer (FRP) had appeared. The most famous technique among them is strengthening the (RC) beams with externally bonded FRP sheet t...
متن کاملExperimental Investigations on U- and L-Shaped End Anchored CFRP Laminate Strengthened Reinforced Concrete Beams - Springer
Strengthening of reinforced concrete beams using externally bonded CFRP laminate is the most popular choice. However, premature end peeling of CFRP laminate has been shown to be the main weakness of this method. Development of high shear and normal stresses at the end of strengthening laminate is the key reason to cause end peeling which is not preventable by conventional anchoring system. This...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2017
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2017.04.094