Studies on Wettability of Refractories by Molten Steels
نویسندگان
چکیده
منابع مشابه
Influence of Wettability and Reactivity on Refractory Degradation – Interactions of Molten Iron and Slags with Steelmaking Refractories at 1550°C
Refractories, materials that can withstand high temperatures, play an important role in the iron and steel sector which alone accounts for ~70% of total refractories pro‐ duced. In this chapter, detailed wettability and interfacial phenomena investiga‐ tions on alumina-carbon and zirconia-carbon refractories at steelmaking temperatures. The wettability between refractory substrates and molten i...
متن کاملWettability of Carbonaceous Materials with Molten Iron at 1550°C
In the direct iron smelting process, interfacial reactions of carbonaceous materials with molten iron are among some of the key factors that dictate the rate of carbon transfer into molten iron and establish a carbon concentrated melt to reduce iron oxide in the slag phase. Detailed wettability investigations on a range of carbonaceous materials, e.g. synthetic graphite, natural graphite, coke,...
متن کاملWettability of amorphous and nanocrystalline Fe78B13Si9 substrates by molten Sn and Bi
The wettability of amorphous and annealing-induced nanocrystalline Fe78B13Si9 ribbons by molten Sn and Bi at 600 K was measured using an improved sessile drop method. The results demonstrate that the structural relaxation and crystallization in the amorphous substrates do not substantially change the wettability with molten Bi because of their invariable physical interaction, but remarkably det...
متن کاملTHE EFFECT OF CRYOLITE NA3ALF6 AND SODIUM FLUORIDE NAF ON THE CORROSION AND WETTING BY MOLTEN AL-SI ALLOY OF ANDALUSITE BASED REFRACTORIES
In order to improve the corrosion resistance of aluminosilicate refractories by molten aluminum, alkaline fluoride NaF and cryolite Na3AlF6 powders were studied. Both physical and chemical properties are known to influence wetting and corrosion behavior. This paper devoted to determine the influence of alkaline fluoride and cryolite added to andalusite based castable on the reaction with a...
متن کاملY Studies on Austenitic Stainless Steels
Abstract--In this investigation, the fracture surfaces of SS 304 and SS 316 austenitic steels were analysed using the X-ray fractography technique. In both cases, a decrease in the austenite content was observed at the fracture surface as a result of deformation induced martensite, indicating a linear relation with Km~ within the stable crack growth region. The presence of this martensite was f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Association, Japan
سال: 1963
ISSN: 0009-0255,1884-2127
DOI: 10.2109/jcersj1950.71.815_207