Studies on Zn/Mn Electroplated Steel Sheets
نویسندگان
چکیده
منابع مشابه
Experimental and Finite Element Studies on Formability of Low Carbon Steel Sheets using Deep Drawing
Abstract One of the commonly used metal forming processes is deep drawing, in which circular blanks are converted into a cup or shell with good surface finish. In this paper, the forming characteristics of Deep Draw Steel (DDS), a low-carbon steel with many engineering and automotive applications, is investigated by deep drawing. The forming limit diagram is a useful concept in favor of charact...
متن کاملSome Studies on Temperature Distribution Modeling of Laser Butt Welding of AISI 304 Stainless Steel Sheets
In this research work, investigations are carried out on Continuous Wave (CW) Nd:YAG laser welding system after preliminary experimentation to understand the influencing parameters associated with laser welding of AISI 304. The experimental procedure involves a series of laser welding trials on AISI 304 stainless steel sheets with various combinations of process parameters like beam power, beam...
متن کاملHypervelocity impact of a steel microsphere on fused silica sheets
We use the commercial finite element software Abaqus to study three-dimensional deformations of glass panels impacted at normal incidence by a 0.5 mm diameter steel sphere moving at about 3 km/s and having kinetic energy of approximately 2.3 J. We quantify effects of the critical erosion strain and the impact speed upon the conchoidal fracture diameters developed on the frontand the backsurface...
متن کاملDuctile Failure in High Strength Steel Sheets
Developments in computer-aided engineering and the rapid growth of computational power have made simulation-driven process and product development efficient and useful since it enables detailed evaluation of product designs and their manufacturing processes. In the context of a sheet metal component, it is vital to predict possible failure both during its forming process and its subsequent usag...
متن کاملDynamic Characteristics of Automotive Steel Sheets
M. Mihaliková, A. Lišková, Faculty of Metallurgy, Technical University of Košice, Slovakia The aim of this experimental research was to perform an analysis of deformation characteristics on two different types of steel: IF steel, and micro-alloyed steel were used automotive industry. For that purpose changes of properties of these materials were carried out by static 10-3 · s-1 and dynamic 103 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1980
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.66.7_790