Study of an interference fit fastener assembly by finite element modelling, analysis and experiment
نویسندگان
چکیده
منابع مشابه
Modeling of Tactile Detection of an Artery in a Soft Tissue by Finite Element Analysis
Nowadays, one of the main problems encountered in minimally invasive surgery and telesurgery is the detection of arteries in tissue. In this study, for the first time, tactile detection of an artery in tissue and distinguishing it from the tumor has been modeled by finite element method. In this modeling, three 2D models of tissue have been created: tissue, tissue including a tumor, and tissue ...
متن کاملInfluence of an Inclusion on Multi-Pass Copper Shaped-Wire Drawing by 2D Finite Element Analysis
The size and length effects of an inclusion on multi-pass copper shaped-wire drawing were investigated. For this purpose, an experimental investigation on optimal die half-angle was conducted. Based on experimental data of optimal die half-angle, wire and inclusion deformations, drawing and hydrostatic stress of copper shaped-wires that contain an inclusion were calculated by two-dimensional fi...
متن کاملAnalysis of Axisymmetric and Non-Axisymmetric Stretching of Sheet Metals by the Finite Element Method
Stretching process of sheet metals in both cases of axisymmetric and non-axisymmetric is analyzed. A rigid-plastic, normal anisotrop material is assumed and large strain formulation is applied. Triangular elements are used and stiffness equations of elements are obtained from virtual work principle. These nonlinear equations are linearized by Newton-Raphson's method and are solved by Gaussian e...
متن کاملAnalysis of Axisymmetric and Non-Axisymmetric Stretching of Sheet Metals by the Finite Element Method
Stretching process of sheet metals in both cases of axisymmetric and non-axisymmetric is analyzed. A rigid-plastic, normal anisotrop material is assumed and large strain formulation is applied. Triangular elements are used and stiffness equations of elements are obtained from virtual work principle. These nonlinear equations are linearized by Newton-Raphsons method and are solved by Gaussian el...
متن کاملThe Performance of an Hexahedron C* Element in Finite Element Analysis
The performance of an 8-noded hexahedron C1* element in elasticity is investigated. Three translational displacements and their derivatives as strain in each direction are considered as degrees of freedom (d.o.f.’s) at each node. The geometric mapping is enforced using a C0 element with no derivative as nodal d.o.f.’s . The stiffness matrix of the element is also computed using a transformation...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal on Interactive Design and Manufacturing (IJIDeM)
سال: 2012
ISSN: 1955-2513,1955-2505
DOI: 10.1007/s12008-012-0146-z