Study on Composite Material Marine Propellers
نویسندگان
چکیده
منابع مشابه
Numerical investigation on composite material marine current turbine using CFD
A novel manufacturing approach similar to filament winding has been developed and automated and is able to produce the Composite Material Marine Current Turbines (CMMCT), which have significant advantages over traditional designs. This paper presents numerical results to investigate the performance of these turbines. The numerical approach was performed using Computational Fluid Dynamics (CFD) ...
متن کاملPotential of Marine Clay as Raw Material in Geopolymer Composite
In this research, marine clays has been studied its potential as a matrix composite materials that tend to be used as alternative materials to concrete. The study shows that marine clays which mixed with appropriate proportion of alkaline activator could have strength requirements for masonry cement. The alkaline activator that been used for the geopolymerisation reaction is sodium silicate and...
متن کاملDynamic Model for Thrust Generation of Marine Propellers
Mathematical models of propeller thrust and torque are traditionally based on steady state thrust and torque characteristics obtained in model basin or cavitation tunnel tests. Experimental results showed that these quasi steady state models do not accurately describe the transient phenomena in a thruster. A recently published dynamic model was based on the experimental observations. Describing...
متن کاملResistance of Idle Propellers in Marine Multi-propeller Propulsion Systems
The configuration of a marine propulsion system is selected with regard to the maximum power resulting from its maximum design speed and displacement. The propulsion systems of high speed vessels use three or even four propellers, and each propulsion unit may be multi-engine. High speed vessels are designed for maximum speeds, but their factual exploitation speed parameters are usually consider...
متن کاملOptimum composite material design
— The microstructure identification problem is treated : given certain phases in given volume fractions, how to mix them in aperiodic cell so that the effective material constants of the periodic composite lie the closest possible to certain prescribed values ? The problem is studied for the linear conduction équation. It is stated in terms of optimal con trol theory ; the admissible micro geom...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Marine Engineering
سال: 2011
ISSN: 1346-1427,1884-3778
DOI: 10.5988/jime.46.330