Study on Detection Technique for Jetting Failure of Piezo-Driven Inkjet Heads
نویسندگان
چکیده
منابع مشابه
Air entrapment in piezo-driven inkjet printheads
The stability of inkjet printers is a major requirement for high-quality-printing. However, in piezo-driven inkjet printheads, air entrapment can lead to malfunctioning of the jet formation. The piezoactuator is employed to actively monitor the channel acoustics and to identify distortions at an early stage. Modifications of the response of the piezoactuator indicate entrapped air bubbles and t...
متن کاملAn inkjet vision measurement technique for high-frequency jetting.
Inkjet technology has been used as manufacturing a tool for printed electronics. To increase the productivity, the jetting frequency needs to be increased. When using high-frequency jetting, the printed pattern quality could be non-uniform since the jetting performance characteristics including the jetting speed and droplet volume could vary significantly with increases in jet frequency. Theref...
متن کاملDevelopment of Inkjet Nozzle Driven by Double Piezo Actuators
An inkjet nozzle with double piezo transducers has been designed, which is different from conventional inkjet nozzles. The body of the nozzle which is fabricated by precision machining techniques is made from transparent acrylic material to visualize the flow inside the nozzle. The piezoelectric actuators are activated by a voltage amplifier which generates high-voltage bipolar waveforms. The k...
متن کاملHigh Viscosity Jetting System for 3d Reactive Inkjet Printing
High viscosity ink is a potential solution for the improvement of current 3D ink jetting technology. In this study, experiments are carried out to study a series of inks with differing viscosities jetted with PicoDot jet valves under different process parameters of temperature and pressure. Results show that a wide range of ink materials from low viscosity (water like materials) to very high vi...
متن کاملManipulating Drop Formation in Piezo Acoustic Inkjet
Inkjet developments move towards higher productivity and quality, requiring adjustable small droplet sizes fired at high repetition rates. Normally, maximum jetting efficiency is achieved by tuning the slopes of the driving waveform to the travel times of acoustic waves inside the channel. Important parameters are channel length, compliance of channel cross-section (through its impact on the ef...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 2008
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.74.740