Study on Fracture Modeling to Predict Brittle Fracture Resistance under Mixed Mode Loading
نویسندگان
چکیده
منابع مشابه
Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
Present study deals with the prediction of crack initiation angle for mixed mode (I/II) fracture using finite element techniques and J-Integral based approach. The FE code ANSYS is used to estimate the stress intensity factor numerically. The estimated values of SIF were incorporated into six different crack initiation angle criteria to predict the crack initiation angle. Single edge crack spec...
متن کاملDynamic fracture initiation in brittle materials under combined mode I/II loading
A new test method has been developed to measure the resistance of dynamic fracture initiation in brittle materials under combined mode I/I loadings. The Brazilian disks with center-cracks have been fractured under oblique impact loadings in diarnetral-compression. The dynamic stress intensity factors of mode I and H are evaluated from the superposition integrals of the step response functions f...
متن کاملexperimental study of furfurylation effect on fracture of beech wood under mixed mode
fracture of mixed mode i/ii in beech wood and its wood polymers has been investigated experimentally in this study. hence, two crack systems of tl and rl were selected in which the crack planes extend along the wood fibers. this investigation has demonstrated that onset of mixed mode cracking can be predicted with a very simple fracture criterion in these crack systems. results indicated that f...
متن کاملOn an Eigendeformation Approach to Brittle Fracture
The paper presents a numerical implementation of a novel approximation scheme for Griffith’s theory of brittle fracture recently proposed in [1]. The total potential energy of a brittle body (including bulk and surface terms) is variationally approximated by a family of functionals, depending on a small penalty parameter ε. The (two-field) approximating functionals have as arguments the displac...
متن کاملStudy of Variation of the J-integral and the Fracture Toughness in Blunt V-notches under Mode I Loading
Fracture assessment of U- and V-notches is important in mechanical engineering. One can use the J-integral as fracture parameter in order to predict the critical fracture load in notches. The critical value of the J-integral in cracks is a function of the material properties. In notches, however, the material properties as well as the notch dimensions affect this critical value (named fracture ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2018
ISSN: 0288-4771
DOI: 10.2207/qjjws.36.274