Study on friction properties of different abrasive materials and polylactic acid materials

نویسندگان

چکیده

Abstract In recent years, 3D printing technology is often used in various fields such as industry, medical care, and academia, because it can produce components with complex shapes at a lower cost than traditional processing. However, the size of products limited by printable range equipment, so large objects need to be disassembled printed before joining. Friction stir welding join different thermoplastics has considerable potential for industrial applications, influence design tool on formation zone an important key. this study, abrasive materials polylactic acid were friction, changes friction coefficient temperature during process discussed. The experimental results show surface roughness significant effect rise. As increasing tool, wear scars, cracks below scar are both significant. It inferred from crack shape that PLA softens high temperatures then solidifies again, seen streamlined appearance, which means softened carried abrasives highly rough surfaces.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

the effect of esp materials on medical studentsreading proficiency

چکیده این تحقیق " مواد درسی " را به عنوان یکی از بحث برانگیزترین موضوعات آموزش زبان تلقی کرده و درتلاش است به سه سوال عمده پاسخ دهد: 1) آیا بکارگیری جزوات گرداوری شده توسط گروهی از مدرسین تاثیر بسزایی در میزان توانش خواندن و درک متون انگلیسی دانشجویان پزشکی دارد؟ 2) آیا استفاده از مواد درسی اصلی( بین المللی )، توانش خواندن و درک متون انگلیسی دانشجویان پزشکی را به طور چشمگیری تحت تاثیر قرار م...

15 صفحه اول

Experimental Investigation on Friction and Wear Properties of Different Steel Materials

Friction coefficient and wear rate of different steel materials are investigated and compared in this study. In order to do so, a pin on disc apparatus is designed and fabricated. Experiments are carried out when different types of disc materials such as stainless steel 314 (SS 314), stainless steel 202 (SS 202) and mild steel slide against stainless steel 314 (SS 314) pin. Experiments are cond...

متن کامل

Effects of Different Ligature Materials on Friction in Sliding Mechanics

BACKGROUND During orthodontic tooth movement friction occurs at the bracket wire interface. Out of the total force applied to the tooth movement, some of it is dissipated as friction, and the remainder is transferred to the supporting structures of the tooth to mediate tooth movement. However many factors affect friction, and method of arch wire ligation being an important contributing factor. ...

متن کامل

Emission Factors for Abrasive Materials

Abrasive blasting materials, such as coal slag garnet and copper slag, are often used for cleaning metal surfaces to remove rust and to prepare a surface before the application of a coating. The pre-blast and post-blast (spent) abrasive materials contain traces of heavy metal constituents such as Cr, Mn, Ni, Pb Fe, and Ba. Hence, the health risk associated with the resultant particulate emissio...

متن کامل

morphology, geochemistry, mineralogy, and micromorphology of soils of hormozgan province in relation to parent materials

ویژگی های زمین شیمیایی، کانی شناسی، و میکرومورفولوژیکی خاک ها و سنگ مادر مربوطه در منطقه بین بخش های جنوبی زاگرس و خلیج فارس تا دریای عمان(استان هرمزگان، ایران) مورد بررسی قرار گرفت. هدف های این مطالعه شناسایی تغییرات در خصوصیات فیزیکی، شیمیایی، و ترکیب کانی شناسی خاک، مطالعه میکرومورفولوژی و تکامل خاک، و بررسی توزیع عنصر خاک بر اساس هوازدگی، پروسه های خاک و زمین شناسی جهت توصیف اثرات مواد مادر...

15 صفحه اول

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of physics

سال: 2022

ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']

DOI: https://doi.org/10.1088/1742-6596/2345/1/012027