Study on Galloping Characteristics of Large-section Carbon Fiber Composite Core Conductor
نویسندگان
چکیده
منابع مشابه
Gas Sensor Based on Large Hollow-Core Photonic Bandgap Fiber
One concern in using photonic band-gap fiber (PBGF) as a gas sensor is the response time. In this type of the gas sensors, response time is the time required for gas to diffuse into the hollow-core. So considering a large hollow-core PBGF (HC-PBGF), the response time can be significantly reduced. But in the large HC-PBGF, the fundamental issue is the presence of higher order modes (HOMs). Somet...
متن کاملTransmission Line Conductor Galloping Analysis using FEM
To find a mathematical standard of the galloping mechanism, and it is required to compare the existing mathematical standards on the conductor galloping. In this paper, using the Hamilton principle the continuum cable standard for transmission lines was proposed. Discrete standards of one degree of freedom, two degree of freedom, and three degree of freedom were obtained from the Garlekin funct...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملFlexural monitoring of carbon fiber/epoxy composite by acoustic emission
Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as aerospace industry. Therefor monitoring of loading of this type of composite is important. In order to determine failure mecha...
متن کاملMechanical behavior of carbon fiber composite lattice core sandwich panels fabricated by laser cutting
This paper presents a novel method for rapid fabrication and prototyping of low-density carbon fiber sandwich panel cores based on laser beam cutting (LBC). Using LCB, sandwich panels with lattice core constructions with oblique and vertical strut morphologies were fabricated from two fiber-orientation architectures. Scanning electron microscopy images illustrate the relatively small extent of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/740/1/012054