Study on machining by the use of ultrasonic screw vibration. (3rd report). Ultrasonic vibration tapping.

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultrasonic Vibration Assisted Electro-Discharge Machining

An ultrasonic vibration has been superposed on the normal electrode movement to increase the flushing effect during a micro electro-discharge machining (EDM) process. A systematic study on the effects of ultrasonic vibration on the EDM performance for fabricating microholes in Nitinol has been completed. The introduction of ultrasonic vibration to the microEDM process has more than 60 times inc...

متن کامل

Characteristics of Longitudinal and Torsional Vibration for Hole Machining by Ultrasonic Vibration

We are developing a new method using ultrasonic longitudinal and torsional vibration of a hollow-type stepped horn for hole machining. We foresee that the equipment can be simplified and miniaturized. In this paper, ultrasonic vibration sources of a hollow-type stepped horn without a diagonal slits vibration converter and with a diagonal slits vibration converter are used. The longitudinal and ...

متن کامل

Influence of ultrasonic vibration on micro-extrusion.

Micro-forming is a miniaturization technology with great potential for high productivity. Some technical challenges, however, need to be addressed before micro-forming becomes a commercially viable manufacturing process. These challenges include severe tribological conditions, difficulty in achieving desired tolerances, and short tool-life due to inability of available die materials to withstan...

متن کامل

Vibration suppression in ultrasonic machining described by non-linear differential equations via passive controller

Vibrations are usually undesired phenomena as they may cause damage or destruction of the system. However, sometimes they are desirable, as in ultrasonic machining (USM). In such case, the problem is a complicated one, as it is required to reduce the vibration of the machine head and have reasonable amplitude for the tool. In the present work, the coupling of two non-linear oscillators of the t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Japan Society for Precision Engineering

سال: 1989

ISSN: 1882-675X,0912-0289

DOI: 10.2493/jjspe.55.853