Study on Maraging Steel Wire (1)
نویسندگان
چکیده
منابع مشابه
Magnetic Micro-probe Determination of the Condition of Maraging Steel
Microstructural and mechanical properties of precipitation-hardened maraging steel could be stated on a basis of magnetic properties of such a material. A correlation between mechanical and magnetic properties of the maraging steel is treated from the view of non-destructive testing during and after heat treatment as well as during use under unfavourable conditions at elevated operating tempera...
متن کاملEffect of aging and deformation on the microstructure and properties of Fe-Ni-Ti maraging steel
The age-hardening behavior of Fe−25.3Ni−1.7 Ti (wt pct) alloy both in undeformed specimens and in specimens cold deformed by 10 or 20 pct prior to aging was studied. The microstructural changes during aging were observed using transmission electron microscopy (TEM) and atom probe analysis and there were related to the mechanical properties as measured by microhardness and shear punch testing. A...
متن کاملStudies on defects in galvanized coating on steel wire
Causes for deposition of defective galvanized coating (lumpy deposition of coating during hot dip galvanizing) of carbon-steel wire have been investigated. It is established that the lumpy deposition is caused due to segregation of silicon on the surface of steel wire. Due to this change in composition of the steel at surface, the regions get modified and lie in Sandelin hyper reactive zone. Th...
متن کاملReal-time synchrotron X-ray diffraction study on the isothermal martensite transformation of maraging steel in high magnetic fields
MATERALIA Group, Department of Physical Metallurgy, Centro Nacional de Investigaciones Metalúrgicas (CENIM-CSIC), Avenida Gregorio del Amo 8, 28040 Madrid, Spain, Fundamental Aspects of Materials and Energy, Faculty of Applied Sciences, Delft University of Technology, Mekelweg 15, 2629 JB Delft, The Netherlands, Dalton Cumbrian Facility, University of Manchester, Westlakes Science and Technolog...
متن کاملStudy on Wire Rope Brace Design Method of Prestressed Braced Steel Moment Frame
To study the design method of sectional area and initial tension of wire rope brace of the prestressed braced steel moment frame structure system, theoretical analysis of this structure system is conducted in this paper. The lateral stiffness formula is derived. It reveals the lateral stiffness is related to the lateral stiffness of bare steel moment frame, story height, the distance between co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of Japan Society of Spring Engineers
سال: 1967
ISSN: 0385-6917,1348-1479
DOI: 10.5346/trbane.1967.65