Study on Pulp Injection Molding (Part-3)
نویسندگان
چکیده
منابع مشابه
Characterization of an Injection Molding Process for Improved Part Quality
An injection molding process was characterized with respect to certain physical characteristics of an injection molded part. The produced part, the “Triconnector”, is a planar Lego-like piece, which was shot from ABS thermoplastic on a Morgan-Press G-100T Injection Molding Machine. Using statistical design of experiments, we identified the most significant parameters affecting part quality. The...
متن کاملPrecision Injection Molding PRECISION PROCESS CONTROL OF INJECTION MOLDING
1 INTRODUCTION The technical requirements of precision injection molded components demand a heightened level of process performance, and with corresponding process monitoring and control technologies. To obtain the desired critical to quality attributes (CTQs) of the molded products, the injection molding process must be consciously designed such that the key process variables (KPVs) are observ...
متن کاملStudy on residual stresses of thin-walled injection molding
The residual stresses of the thin-walled injection molding are investigated in this study. It was realized that the behavior of residual stresses in injection molding parts was affected by different process conditions such as melt temperature, mold temperature, packing pressure and filling time. The layer removal method was used to measure the residual stresses at a thin-walled test sample by a...
متن کاملExperimental Study and Numerical Simulation of Injection Molding Process for Special-Shaped Plastic Part
Taking the special-shaped plastic part as the research object, numeric simulation and experimental study of the injection molding process are completed based on the synthetical application of numeric simulation technology, orthogonal experiment method, Moldflow, injection machine and CMM. Optimal feeding system and molding process parameters are obtained and qualified products are produced. The...
متن کاملCeramic Injection Molding
Powder injection molding (PIM), which encompasses metal injection molding (MIM) and ceramic injection molding (CIM), is a net-shaping process which enables large scale production of complex-shaped components for use in a diverse range of industries. It combines plastic injection molding techniques and performance attributes of ceramic and metal powders. Ceramic injection molding (CIM) uses cera...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Seikei-Kakou
سال: 2020
ISSN: 0915-4027,1883-7417
DOI: 10.4325/seikeikakou.28.201