Study on Selection of Pressure Regulating Valve for Hydropower Station with Both Surge Tank and Pressure Regulating Valve
نویسندگان
چکیده
منابع مشابه
Pressure Relief Valve Selection
Pressure relief valve is one of the most important devices used on the security of pipelines, since it is responsible to guarantee the integrity of the installations. Generally, the response and behavior of a relief valve during its transient is unknown by users, who employ simplified and static analysis to design the pipeline, further, the information provided by manufactures is limited. The f...
متن کاملPerformance study of a diaphragm type crankcase pressure control valve
Pressure control valve (PCV) is implemented in internal combustion engine to regulate crankcase pressure. In this study, the performance of a diaphragm PCV valve is investigated numerically and experimentally. Firstly, numerical simulation is carried out using commercial code to predict the flow and pressure distribution inside the valve. Furthermore, downstream and upstream pressure of the val...
متن کاملEffect of Contact Pressure and Frequency on Contact Heat Transfer Between Exhaust Valve and its Seat
The hot gases produced by the internal combustion engines passes through the exhaust valve and causes high temperatures in the exhaust valve and its seat. To avoid damaging the exhaust valve, heat must be transferred from the valve to its seat during the contact they make at the opening and closing cycle. Heat transfer rate from the exhaust valve to its seat is a function of many factors. One o...
متن کاملHydraulic Transients in the Long Diversion-Type Hydropower Station with a Complex Differential Surge Tank
Based on the theory of hydraulic transients and the method of characteristics (MOC), a mathematic model of the differential surge tank with pressure-reduction orifices (PROs) and overflow weirs for transient calculation is proposed. The numerical model of hydraulic transients is established using the data of a practical hydropower station; and the probable transients are simulated. The results ...
متن کاملEffects of Valve Closing Law and Unsteady Friction Model on Damping Pressure Waves in a Network
Water-hammer is a transient condition which may occur in a network as a result of rapid or slow valve closures, pump failures, changes in turbine loading, etc. It creates high and low pressure waves which travel along the system and decay as a result of wall shear stress. Comparison o experimental and theoretical results revealed the failure of steady or quasi-steady models in correctly predict...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2018
ISSN: 2261-236X
DOI: 10.1051/matecconf/201824601033