STUDY ON SHEAR STRENGTH OF REINFORCED CONCRETE WALLS SUBJECTED TO BIAXIAL BENDING-SHEAR : Part 2 Biaxial Bending-Shear Strength
نویسندگان
چکیده
منابع مشابه
Shear Strength of Lightly Reinforced T-Beams in Negative Bending
Nine restrained T-beams were tested in a study of the negative moment region shear strength of lightly reinforced concrete T-beams. Variables included the longitudinal reinforcement ratio p, (0.47 percent and 0. 70 percent) and the nominal stirrup strength (0 to 84 psi [0 to 0.60 MPa]). The test results are compared with the shear provisions of "Building Code Requirements for Reinforced Concret...
متن کاملShear and Flexural Stiffnesses of Reinforced Concrete Shear Walls Subjected to Cyclic Loading
Seismic analyses of concrete structures under maximum-considered earthquakes require the use of reduced stiffness accounting for cracks and degraded materials. Structural walls, different to other flexural dominated components, are sensitive to both shear and flexural stiffness degradations. Adoption of the gross shear stiffness for walls in seismic analysis prevails particularly for the design...
متن کاملShear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملStrength of arch-shaped members in bending and shear
Arch-shaped members are widely used for construction of tunnels, bridges, silos and shells. These members are not typically provided with transverse reinforcement and may thus have a brittle behaviour at failure. When subjected to bending or shear, traditional design methods used for straight members are not applicable due to deviation forces developing at the curved chords carrying compression...
متن کاملShear strength model of reinforced concrete circular cross-section members
A shear capacity model of reinforced concrete members with circular cross section transversely reinforced with circular hoops has been developed. The proposed model is based on the truss analogy by adding a concrete contribution term to the capacity of the shear reinforcement. An additional deviatoric shear resisting th c curv pres nism ste ved und ctor mechanism of hoops present solely in memb...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan
سال: 1980
ISSN: 0387-1185,2433-0027
DOI: 10.3130/aijsaxx.296.0_89