Study on the Disk Brake Squeal : Simulation Using Modal Analysis Technique and Experiments
نویسندگان
چکیده
منابع مشابه
Disk brake squeal prediction using the ABLE algorithm
Disk brake squeal noise is mainly due to unstable friction-induced vibration. A typical disk brake system includes two pads, a rotor, a caliper and a piston. In order to predict if a disk brake system will generate squeal, the finite element method (FEM) is used to simulate the system. At the contact interfaces between the pads and the rotor, the normal displacement is continuous and Coulomb’s ...
متن کاملExperimental analysis on squeal modal instability
In this paper, an experimental analysis performed on a simplified brake apparatus is presented. Brake squeal is a major concern in braking design. During past years a common approach for squeal prediction was the complex eigenvalues analysis. Squeal phenomenon is treated like a dynamic instability. When two modes of the brake system couple at the same frequency, one of them becomes unstable lea...
متن کاملShape Optimization for Brake Squeal
1. Abstract The present paper describes a solution to a non-parametric shape optimization problem of a brake model suppressing squeal noise. The brake model consists of a rotor and a pad between which the Coulomb friction occurs. A main problem is defined as a complex eigenvalue problem of the brake model obtained from the equation of motion. As an objective cost function, we use the positive r...
متن کاملA combined approach of complex eigenvalue analysis and design of experiments (DOE) to study disc brake squeal
This paper proposes an approach to investigate the influencing factors of the brake pad on the disc brake squeal by integrating finite element simulations with statistical regression techniques. Complex eigenvalue analysis (CEA) has been widely used to predict unstable frequencies in brake systems models. The finite element model is correlated with experimental modal test. The ‘input-output’ re...
متن کاملInstability prediction of brake squeal by nonlinear stability analysis
ABSTRACT Prediction of brake squeal as unwanted high frequency noise above 1 kHz remains a challenging problem despite substantial research efforts in the past two decades. Brake squeal, triggered by friction-induced self-excited vibration, can be caused by many different and interacting mechanisms with nonlinear origins in material properties and boundary conditions. Although brake squeal is e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1984
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.50.1585