Study on the SiCp/Al Composites Prepared by Pressureless Infiltration
نویسندگان
چکیده
منابع مشابه
Fabrication of Fe-Based Diamond Composites by Pressureless Infiltration
A metal-based matrix is usually used for the fabrication of diamond bits in order to achieve favorable properties and easy processing. In the effort to reduce the cost and to attain the desired bit properties, researchers have brought more attention to diamond composites. In this paper, Fe-based impregnated diamond composites for drill bits were fabricated by using a pressureless infiltration s...
متن کاملTHE EFFECT OF COBALT ADDITIVE ON MICROSTRUCTURE AND PROPERTIES OF W-CU COMPOSITES PREPARED BY SINTERING AND INFILTRATION PROCESSES
In the present paper, the influence of cobalt additive on the sintering/infiltration behavior of W-Cu composite was studied. For this purpose, the mixed powders of tungsten and cobalt were compacted by CIP method and then sintered at 1450, 1550 and 1600 °C in a hydrogen atmosphere. The sintered specimens at 1550 °C were subsequently infiltrated with liquid copper at 1250 °C for 10, 60 and 1...
متن کاملa study on insurer solvency by panel data model: the case of iranian insurance market
the aim of this thesis is an approach for assessing insurer’s solvency for iranian insurance companies. we use of economic data with both time series and cross-sectional variation, thus by using the panel data model will survey the insurer solvency.
Grinding Effect of C/C-SiC Composites Prepared by Isothermal Chemical Vapour Infiltration during Braking Process
A kind of 2.5-dimensional C/C-SiC composites was fabricated by using Isothermal Chemical Vapour Infiltration process (ICVI). Frictional properties of this material were evaluated by using MM-1000 under dry condition. Average dynamic friction coefficient of it was 0.16, static friction coefficient and average coefficient stability were 0.15 and 0.56, respectively. However, weight wear rate was l...
متن کاملMicrostructure of 3d Textile C/pyc/sic Composites Prepared by Chemical Vapor Infiltration
Ceramic matrix composites (CMCs) is one of the most promising candidates for high temperature structural material, in which SiC matrix exhibits an excellent oxidation resistance because of the formation of a protective layer of silica which limits further oxidation [1]. CMCs with continuous fibers exhibit attractive properties such as low densities, high elastic moduli, and high strengths at el...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Asian Journal of Chemistry
سال: 2013
ISSN: 0970-7077,0975-427X
DOI: 10.14233/ajchem.2013.oh20