Study on Tool Deterioration in Machining with Minimum Quantity Lubrication (MQL) Condition
نویسندگان
چکیده
منابع مشابه
Minimum Quantity Lubrication (MQL) in Machining: Benefits and Drawbacks
Micro lubrication or also known as minimum quantity lubrication (MQL) serves as an alternative to flood cooling by reducing the volume of cutting fluid used in the machining process; but not without significant health concerns. Flood cooling is primarily used to cool and lubricate the cutting tool and work piece interface during machining process. The adverse health effects caused by the use of...
متن کاملMachining Using Minimum Quantity Lubrication: A Technology for Sustainability
The purpose of this article is to review the relevant literature in machining using minimum quantity lubrication particularly as it pertains to environmental, and health issues , and outline future potential research in this technology. The results indicate that the process of mist particles generation and their physical characteristics are yet to be determined for a whole class of machining pr...
متن کاملAnalysis of Minimum Quantity Lubrication (MQL) for Different Coating Tools during Turning of TC11 Titanium Alloy
The tool coating and cooling strategy are two key factors when machining difficult-to-cut materials such as titanium alloy. In this paper, diamond coating was deposited on a commercial carbide insert as an attempt to increase the machinability of TC11 alloy during the turning process. An uncoated carbide insert and a commercial Al₂O₃/TiAlN-coated tool were also tested as a comparison. Furthermo...
متن کاملCharacterization of Cutting Parameters in the Minimum Quantity Lubricant (MQL) Machining Process of a Gearbox
This paper aims to find the key process parameters for machining different parts of an automobile gearbox, commissioned by a company that needs to replace with the MQL lubrication system their current machining process based on cutting fluids. It particularly focuses on the definition of appropriate cutting parameters for machining under the MQL condition through a statistical method of Design ...
متن کاملTool Wear and Surface Roughness Prediction using an Artificial Neural Network (ANN) in Turning Steel under Minimum Quantity Lubrication (MQL)
Tool wear and surface roughness prediction plays a significant role in machining industry for proper planning and control of machining parameters and optimization of cutting conditions. This paper deals with developing an artificial neural network (ANN) model as a function of cutting parameters in turning steel under minimum quantity lubrication (MQL). A feed-forward backpropagation network wit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TEKNIK
سال: 2020
ISSN: 2460-9919,0852-1697
DOI: 10.14710/teknik.v41i3.27348