Study on Vibration Specification Analysis Procedure of Equipment with Isolator
نویسندگان
چکیده
منابع مشابه
On Parameter Study of Cubic Nonlinear Vibration Isolator
The purpose of optimizing isolator parameters is to have a system that is stiff at low frequency but soft in high frequency. However, in this case a small amount of transmitted force will cause a large displacement in isolator. Exceeding the allowable relative displacement may cause serious damage to the system. Therefore a trade off between the transmitted force, which is indicated by absolute...
متن کاملExperimental study on a nonlinear vibration isolator based on a post-buckled inverted L-shaped beam
In this paper, the characteristics and the effectiveness of a nonlinear passive vibration isolator based on a post-buckled beam is investigated experimentally. The intended application is specifically isolation in the vertical direction where the isolator is required to be sufficiently stiff statically to bear the weight of the isolated mass. The isolator consists of two beams joined to form an...
متن کاملMechatronic Vibration Isolator for the Microtechnics with Real-time Interaction
A mechatronic vibration isolation system has been developed on the basis of system theory. This equipment integrates mechanics, pneumatics and electronics in synergistic co-operation. The electronic control is responsible for the dynamic behaviour and the special computing transfer block for the real time interaction and compensation of floor vibration disturbances. INTRODUCTION The method for ...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولGeneric Vibration Criteria for Vibration-Sensitive Equipment
The vibration criterion (VC) curves, commonly used in the design of facilities which house vibration-sensitive instruments and tools, were developed by the author and his colleagues, in the early 80’s, published by SPIE in 1991 and by IEST in 1993. Each of the criterion curves A through E is associated with a “line width” or “detail size” which was an attempt by the authors to describe the capa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Korean Society for Noise and Vibration Engineering
سال: 2019
ISSN: 1598-2785,2287-5476
DOI: 10.5050/ksnve.2019.29.1.057