Sugar Palm Fibre-Reinforced Unsaturated Polyester Composite Interface Characterisation by Pull-Out Test
نویسندگان
چکیده
منابع مشابه
Thermogravimetric analysis of aluminised E-glass fibre reinforced unsaturated polyester composites
Novel aluminised E-glass fibre reinforced unsaturated polyester composites, originally formulated for enhanced thermal and electrical shielding properties were evaluated in terms of their thermal performance. The thermal degradation of these specimens was analysed using a thermogravimetric analyser (TGA). The samples were heated from ambient temperature to 500 1C at a heating rate of 20 1C/min....
متن کاملEffect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites
Hemp fibre reinforced unsaturated polyester composites (HFRUPE) were subjected to water immersion tests in order to study the effects of water absorption on the mechanical properties. HFRUPE composites specimens containing 0, 0.10, 0.15, 0.21 and 0.26 fibre volume fraction were prepared. Water absorption tests were conducted by immersing specimens in a de-ionised water bath at 25 C and 100 C fo...
متن کاملOil-Palm-Fibre Reinforced Phenolformaldehyde Composites
Thermophysical properties such as, effective thermal conductivity (A,,) and effective thermal diffusivity (Xc) of untreated reinforced phenol formaldehyde with different weight per centages of oil-palmfibre (x) are measured simultaneously using the transient plane source (TPS) technique between 80 to 120"C. The composites investigated contain 20, 30 and 50 weight per centage of oil-palm-fibre. ...
متن کاملA shear-lag model with a cohesive fibre–matrix interface for analysis of fibre pull-out
A shear-lag model with a cohesive fibre–matrix interface has been developed for the analysis of stress transfer between the fibre and the matrix in fibre-reinforced composites in this paper. A bilinear cohesive damage evolution law is used to describe the fibre–matrix interface behaviour. The governing equations for the interfacial shear stress and the axial stress in the fibre are derived. Acc...
متن کاملTheoretical model of piezoelectric fibre pull-out
A theoretical model of a single piezoelectric fibre pull-out is developed to study the interaction between fibre deformation, pull-out stress and corresponding electrical field. Computer simulation of the stress–displacement curve of the fibre pull-out process is presented. Numerical examples show that the piezoelectric fibre pull-out behaviour can be both described and affected by its electric...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2011
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.471-472.1034