Suitability of various complex hydrides for foaming aluminum alloys
نویسندگان
چکیده
منابع مشابه
Simulation of Foaming and Deformation for Composite Aluminum Foams
In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results s...
متن کاملExpansion Mechanism in Foaming Aluminum Melts
The expansion of molten aluminum foam was studied to determine flow mechanisms in the cellular melt. The structure of the foaming melt evolved through a series of deformation stages before the foam stabilized and solidified. Changes in cell geometry during foam expansion were observed at different positions within the mold cavity and analyzed to determine flow mechanisms. The deformation patter...
متن کاملComplex Hydrides for Hydrogen Storage
Complex hydrides, containing a minimum of 7.5 wt% hydrogen, are being investigated as hydrogen storage compounds for automotive use. As a new project, the work to date has largely involved refurbishment of equipment and acquisition of study materials. Initial experiments have confirmed that the instrumentation is functioning and that the data being obtained agree with that in the literature. In...
متن کاملAluminum and Aluminum Alloys Casting Problems
Aluminum castings have played an integral role in the growth of the aluminum industry since its inception in the late 19th century. The first commercial aluminum products were castings, such as cooking utensils and decorative parts, which exploited the novelty and utility of the new metal. Those early applications rapidly expanded to address the requirements of a wide range of engineering speci...
متن کاملMicrowave Sintering of Aluminum Alloys
Until 2000 almost all research in the microwave sintering area was confined to non-metallic materials. However, after the first report by Penn State in 1999 on full sintering of steel powders in microwave, now in the last few years there has been increasing interest in applying microwave energy for processing of variety of metallic materials. The present study is an extension of this work and r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research
سال: 2013
ISSN: 0884-2914,2044-5326
DOI: 10.1557/jmr.2013.110