Superhydrophobic aluminum-magnesium surfaces obtained with cerium coatings
نویسندگان
چکیده
منابع مشابه
Superhydrophobic and Anti-icing Coatings on Aluminium Alloy Surfaces
A superhydrophobic and anti-icing surface was prepared by consecutive immersion in boiling water and sputtering of polytetrafluoroethylene on the surface of an aluminium alloy substrate. The immersion time in boiling water plays an important role on the surface morphology and water repellency of the deposited RF-sputtered Teflon coating. The Teflon-like coating deposited on a rough surface achi...
متن کاملPorous polymer coatings: a versatile approach to superhydrophobic surfaces.
We present a facile and inexpensive approach to superhydrophobic polymer coatings. The method involves the in-situ polymerization of common monomers in the presence of a porogenic solvent to afford superhydrophobic surfaces with the desired combination of micro- and nano-scale roughness. The method is applicable to a variety of substrates and is not limited to small areas or flat surfaces. The ...
متن کاملFluorine Based Superhydrophobic Coatings
Superhydrophobic coatings, inspired by nature, are an emerging technology. These water repellent coatings can be used as solutions for corrosion, biofouling and even water and air drag reduction applications. In this work, synthesis of monodispersive silica nanoparticles of ~120 nm diameter has been realized via Stöber process and further functionalized using fluoroalkylsilane (FAS-17) molecule...
متن کاملAnti-icing superhydrophobic coatings.
We use nanoparticle-polymer composites to demonstrate the anti-icing capability of superhydrophobic surfaces and report direct experimental evidence that such surfaces are able to prevent ice formation upon impact of supercooled water both in laboratory conditions and in natural environments. We find that the anti-icing capability of these composites depends not only on their superhydrophobicit...
متن کاملSuperhydrophobic Coatings with Reduced Ice Adhesion
A brief description of how superhydrophobicity can help mitigate the ice accretion problem on power network equipment and other exposed structures by reducing ice-tosurface adhesion is presented. Basic models, namely the Wenzel and Cassie–Baxter models, accounting for the contact angle of water on solid surfaces relating to the influence of surface roughness on hydrophobicity are discussed. The...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2019
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2019.07.024