Superplastic Ceramics: A Comparison with Superplastic Flow in Metals.
نویسندگان
چکیده
منابع مشابه
Development of Superplastic Structural Ceramics
Superplastic structural ceramics (Y-TZP, A1203, Si3N4, and their composites) that can withstand biaxial stretching to large strains have been developed recently. Microstructural design of these ceramics first requires an ultrafine grain size that is stable against coarsening during sintering and deformation. A low sintering temperature is a necessary, but not a sufficient, condition for achievi...
متن کاملSuperplastic Flow of Two-Phase Ceramics Containing Rigid lnclusions— Zirconia/Mullite Composites
A continuum theory for non-Newtonian flow of a two-phase composite containing rigid inclusions is presented. I t predicts flow suppression by a factor of (1 V)p, where V is the volume fraction of the rigid inclusion and q depends on the stress exponent and the inclusion shape. Stress concentrations in the rigid inclusion have also been evaluated. As the stress exponent increases, flow suppressi...
متن کاملCavitation During Superplastic Forming
Cavitation is the opening of pores during superplastic forming, typically at grain boundary triple points or on second phase grain boundary particles during slip of grain boundaries. Theories for the initiation of cavitation are reviewed. It seems that cavitation is unlikely to occur by processes intrinsic to metals such as dislocation mechanisms or point defect condensation. It is proposed tha...
متن کاملA comparison of failure prediction methods for superplastic deformation
This paper presents a comparison between a number of different failure prediction methods for superplastic forming processes. Attention is limited here to superplastic forming of Ti-6Al-4V at 927C. The failure prediction methods considered include the flow localisation factor approach, forming limit curves based on void growth models, such as the Rice and Tracey model and the Cocks and Ashby mo...
متن کاملOptimization of Superplastic Forming Technology
The objective of this paper is a superplastic forming (SPF) technologies design and optimization. The conditions of superplasticity are very sensitive to strain rates and temperature characteristic of deformation process. The presented work gives an approach to design the SPF technologies that satisfies such conditions.A possibility to decrease the temperature of the industrial forming of the T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the Japan Institute of Metals
سال: 1991
ISSN: 0021-4426,1884-5835
DOI: 10.2320/materia1962.30.1001