Superplastic Deformation Mechanisms of Mechanically Alloyed Aluminum
نویسندگان
چکیده
منابع مشابه
Deformation Mechanisms in Pure and Alloyed Copper Films
In this work, the evolution of microstructure and the thermo-mechanical behavior of co pper and dilute copper alloy thin films was investigated. 0.3 to 2.0 μm thick film s were deposited by magnetron sputtering under ultra high vacuum conditions onto diffusion-barrier coated silicon substrates and subjected to wafer curvature measurements. Pure copper films annealed in ultra high vacuum exhibit...
متن کاملXANES of Mechanically Alloyed Y-Fe System
We have measured X-ray absorption near edge structure (XANFS) of mechanically alloyed YzFe and YFez system as a fundion of milling time. An amorphous phase is obtained by mechanical alloying for 100 hours in the YzFe system and for 500 hours in the YFez system. In both systems the intensity of Fe Is-4pn transition grows up significantly with increasing the milling time and approaches to that of...
متن کاملThe role of dense dislocation walls on the deformation response of aluminum alloyed hadfield steel polycrystals
The deformation response and texture evolution of aluminum alloyed Hadfield steel polycrystals is explored in the presence of high-density islocation walls. A recently developed visco-plastic self-consistent model accounting for the contribution of the dense dislocation walls to strain ardening was utilized in predicting the room temperature deformation response under tension and the accompanyi...
متن کاملSuperplastic deformation induced by cyclic hydrogen charging
Deformation under the combined action of external stress and cyclic hydrogen charging/discharging is studied in a model material, titanium. Cyclic charging with hydrogen is carried out at 860 °C, which repeatedly triggers the transformation between hydrogen-lean -Ti and hydrogen-rich -Ti. Due to bias from the externally applied tensile stress, the internal mismatch strains produced by this isot...
متن کاملMechanisms of Dynamic Deformation and Dynamic Failure in Aluminum Nitride
Uniaxial quasi-static, uniaxial dynamic and confined dynamic compression experiments have been performed to characterize the failure and deformation mechanisms of a sintered polycrystalline aluminum nitride using a servohydraulic machine and a modified Kolsky bar. Scanning electron microscopy and transmission electron microscopy (TEM) are used to identify the fracture and deformation mechanisms...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 1991
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.32.1149